IPv6: Cisco: Static Routing Sedehana
Revision as of 16:25, 5 January 2019 by Onnowpurbo (talk | contribs)
R1:
Ethernet1/1 - ke Internet Ethernet1/2 - R2: Ethernet 1/1 Ethernet1/3 - LAN
R2:
Ethernet1/1 - R1: Ethernet1/2 Ethernet1/2 - LAN
R1:
enable
configure terminal
ipv6 unicast-routing
interface ethernet1/1
ip address dhcp
ip dhcp client request
no shutdown
exit
interface ethernet1/2
ip address 172.16.1.1 255.255.255.252
ipv6 address 2001:172:16:1::1/64
no shutdown
exit
interface ethernet1/3
ip address 192.168.1.1 255.255.255.0
ipv6 address 2001:192:168:1::1/64
exit
ip route 192.168.2.0 255.255.255.0 172.16.1.2
ipv6 route 2001:192:168:2/64 2001:172:16:1::2
exit
R2:
enable
config terminal
ipv6 unicast-routing
interface ethernet1/1
ip address 172.16.1.2 255.255.255.252
ipv6 address 2001:172:16:1::2/64
no shutdown
exit
interface ethernet1/2
ip address 192.168.2.1 255.255.255.0
ipv6 address 2001:192:168:2::1/64
no shutdown
exit
ip route 192.168.1.0 255.255.255.0 172.16.1.1
ip route 0.0.0.0 0.0.0.0 172.16.1.1
ipv6 route 2001:192:168:1/64 2001:172:16:1::1
exit
Test
R1:
ping 192.168.2.1 ping ipv6 2001:192:168:2::1
R2:
ping 192.168.1.1 ping ipv6 2001:192:168:1::1
Cek
show ipv6 route show ipv6 route static
Setting Client
LAN 1 Client:
ip 192.168.1.2 gw 192.168.1.1
LAN 2 Client:
ip 192.168.2.2 gw 192.168.2.1
Pranala Menarik