Juniper: Shutdown Reboot

From OnnoWiki
Revision as of 03:53, 25 December 2018 by Onnowpurbo (talk | contribs) (→‎To restart the switch from the front panel:)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Reset / Meng-NOL-kan System

request system zeroize


Power off

request system power-off


Halt

request system halt
  • Wait until a message appears on the console confirming that the operating system has halted. For information about the request system halt command, see the Junos OS command documentation.
  • Disconnect power from the switch by pulling out the male end of the power cord connected the power source outlet.

Reboot

request system reboot

This command will also notify other users connected to the switch about the operation.

To restart the switch from the front panel:

  • From the LCD front panel menu push the Menu button.
  • When the MAIN MENU (Maintenance menu) appears, press the Enter button.
  • Select the SYSTEM REBOOT option and press the Enter button.
  • To exit the menu without rebooting the switch, press the Menu button again.

Pranala Menarik