OpenWRT: Routing ke usb tethering
Revision as of 09:16, 10 September 2017 by Onnowpurbo (talk | contribs) (Created page with "On the Smartphone Enable USB Tethering on your Smartphone and connect it with the USB cable to your routers USB port. On the router Use the new usb0 (or for some cases eth1)...")
On the Smartphone
Enable USB Tethering on your Smartphone and connect it with the USB cable to your routers USB port. On the router
Use the new usb0 (or for some cases eth1) network device as WAN connection and set the protocol to DHCP client mode.
uci del network.wan uci set network.wan=interface uci set network.wan.ifname=usb0 uci set network.wan.proto=dhcp uci commit network
After commiting the changes to the network configuration bring up the WAN interface to obtain an IP, gateway and DNS address from your Smartphones DHCP server.
ifup wan