Konfigurasi WPA di Slackware

Date: Sun, 10 Aug 2008 08:53:49 -0700 (PDT)
From: Dani Firman Syah <xnuxer@yahoo.com>
To: muniardi munir <muniardi_ti@yahoo.co.id>, Onno W. Purbo <onno@indo.net.id>
Cc: dani@xnuxer.or.id

Install terlebih dahulu paket wpa_supplicant di slackware, silahkan download di:

http://www.slackware.com/~alien/slackbuilds/wpa_supplicant/pkg/current/wpa_supplicant-0.5.9-i486-1.tgz

buat konfigurasi wpa_supplicant.conf :

   # This line enables the use of wpa_cli which is used by rc.wireless
   # if possible (to check for successful association)
   ctrl_interface=/var/run/wpa_supplicant
   # By default, only root (group 0) may use wpa_cli
   ctrl_interface_group=0
   eapol_version=1
   ap_scan=1
   fast_reauth=1

   # WPA
   network={
   scan_ssid=0
   ssid="xxxx" # Sesuaikan dg SSID yg di pakai
   proto=WPA
   key_mgmt=WPA-PSK
   pairwise=CCMP TKIP
   group=CCMP TKIP WEP104 WEP40
   psk="xxxxxxxx"  # tulis PSK-Key nya disini
   }

Jalankan aplikasi wpa_supplicant, misal kalo device wireless Atheros-nya adalah ATH0 :

wpa_supplicant -d -c /etc/wpa_supplicant.conf -iath0 -Dmadwifi

Konfigurasikan IP address sesuai dengan konfigurasi jaringan, kalo DHCP gunakan dhclient atau dhcpcd. Untuk static IP cukup gunakan ifconfig.

DNF