PowerDNS: Instalasi DNS Recursor

From OnnoWiki
Revision as of 10:47, 1 June 2015 by Onnowpurbo (talk | contribs) (New page: Installing PowerDNS Recursor June 14, 2010 by aip·0 Comment PowerDNS Recursor is a resolving DNS server, that runs as a separate process. The authoritative pdns_server can be configured...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Installing PowerDNS Recursor June 14, 2010 by aip·0 Comment

PowerDNS Recursor is a resolving DNS server, that runs as a separate process. The authoritative pdns_server can be configured to proxy recursive queries to the recursor, and optionally overlay authoritative zone data.

The Recursor is used by several of the largest Internet providers of the world, including AOL, Shaw Cable and Neuf Cegetel.

1. Install the pdns-recursor package

apt-get install pdns-recursor

2. Configure the server to listen to all interfaces and allow queries from the local network (pico /etc/powerdns/recursor.conf)

allow-from=192.168.1.0/24 local-address=0.0.0.0

Replace 192.168.1.0/24 with your local network or the network allowed to query the resolving NS server.

3. Restart the DNS server

/etc/init.d/pdns-recursor restart


Referensi