APRS: Setup Console Terminal komunikasi serial di Linux
Revision as of 10:31, 19 May 2014 by Onnowpurbo (talk | contribs)
Instalasi Aplikasi screen
sudo apt-get install screen
Parameter serial untuk TNC biasanya
Baud Rate: 19200 Data: 8-bit Parity: None Stop: 1-bit Flow Control: None
Jalankan
dmesg
Jika USB serial baru di colok di bagian bawah akan tampak kira-kira
usb 3-1: new full-speed USB device number 2 using uhci_hcd usb 3-1: New USB device found, idVendor=067b, idProduct=2303 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: USB-Serial Controller D usb 3-1: Manufacturer: Prolific Technology Inc. usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 pl2303 3-1:1.0: pl2303 converter detected usb 3-1: pl2303 converter now attached to ttyUSB0
Perhatian kata-kata "... now attached to ttyUSB0". 'ttyUSB0' adalah address USB di file system anda.
Sekarang lakukan
sudo screen /dev/ttyUSB0 19200,cs8,-ixon,-ixoff