APRS: Setup Console Terminal komunikasi serial di Linux
Revision as of 10:28, 19 May 2014 by Onnowpurbo (talk | contribs)
Instalasi Aplikasi screen
sudo apt-get install screen
Parameter serial untuk TNC biasanya
Baud Rate: 19200 Data: 8-bit Parity: None Stop: 1-bit Flow Control: None
Jalankan
dmesg
Jika USB serial baru di colok di bagian bawah akan tampak kira-kira
usb 6-1: Detected FT232RL usb 6-1: Number of endpoints 2 usb 6-1: Endpoint 1 MaxPacketSize 64 usb 6-1: Endpoint 2 MaxPacketSize 64 usb 6-1: Setting MaxPacketSize 64 usb 6-1: FTDI USB Serial Device converter now attached to ttyUSB0
Perhatian kata-kata "... now attached to ttyUSB0". 'ttyUSB0' adalah address USB di file system anda.
Sekarang lakukan
sudo screen /dev/ttyUSB0 19200,cs8,-ixon,-ixoff