APRS: Setup Console Terminal komunikasi serial di Linux

From OnnoWiki
Revision as of 10:07, 19 May 2014 by Onnowpurbo (talk | contribs) (New page: Instalasi Aplikasi screen sudo apt-get install screen Parameter serial untuk TNC biasanya Baud Rate: 19200 Data: 8-bit Parity: None Stop: 1-bit Flow Control: None Sambungkan kabe...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Instalasi Aplikasi screen 

sudo apt-get install screen

Parameter serial untuk TNC biasanya 

Baud Rate: 19200
Data: 8-bit
Parity: None
Stop: 1-bit
Flow Control: None

Sambungkan kabel USB ke port "CONSOLE" di E100. Jalankan 

dmesg

Jika USB serial baru di colok di bagian bawah akan tampak kira-kira 

usb 6-1: Detected FT232RL
usb 6-1: Number of endpoints 2
usb 6-1: Endpoint 1 MaxPacketSize 64
usb 6-1: Endpoint 2 MaxPacketSize 64
usb 6-1: Setting MaxPacketSize 64
usb 6-1: FTDI USB Serial Device converter now attached to ttyUSB0

Perhatian kata-kata "... now attached to ttyUSB0". 'ttyUSB0' adalah address USB di file system anda.

Sekarang lakukan 

sudo screen /dev/ttyUSB0 19200,cs8,-ixon,-ixoff
Retrieved from "https://onnocenter.or.id/wiki/index.php?title=APRS:_Setup_Console_Terminal_komunikasi_serial_di_Linux&oldid=40504"