IPv6 KOnfigurasi: Debian Linux
Revision as of 07:24, 4 July 2013 by Onnowpurbo (talk | contribs)
Informasi berikut merupakan kontribusi dari Stephane Bortzmeyer <bortzmeyer at nic dot fr>
Pastikan IPv6 di load, bisa karena di compile di kernel atau module di load.
Be sure that IPv6 is loaded, either because it is compiled into the kernel or because the module is loaded. For the latest, three solutions, adding it to /etc/modules, using the pre-up trick shown later or using kmod (not detailed here).
Configure your interface. Here we assume eth0 and address (2001:0db8:1234:5::1:1). Edit /etc/network/interfaces:
iface eth0 inet6 static pre-up modprobe ipv6 address 2001:0db8:1234:5::1:1 # To suppress completely autoconfiguration: # up echo 0 > /proc/sys/net/ipv6/conf/all/autoconf netmask 64 # The router is autoconfigured and has no fixed address. # It is magically # found. (/proc/sys/net/ipv6/conf/all/accept_ra). Otherwise: #gateway 2001:0db8:1234:5::1
And you reboot or you just
# ifup --force eth0
and you have your static address.
15.3.1. Further information
IPv6 with Debian Linux
Jean-Marc V. Liotier's HOWTO for Freenet6 & Debian Users (announced 24.12.2002 on mailinglist users@ipv6.org )