IPv6 Route: Menambahkan IPv6 route melalui sebuah gateway

From OnnoWiki
Revision as of 11:08, 22 May 2013 by Onnowpurbo (talk | contribs) (New page: 7.1. Displaying existing IPv6 routes First you should check, whether and which IPv6 addresses are already configured (perhaps auto-magically during auto-configuration). 7.1.1. Using "ip" ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

7.1. Displaying existing IPv6 routes

First you should check, whether and which IPv6 addresses are already configured (perhaps auto-magically during auto-configuration). 7.1.1. Using "ip"

Usage:

  1. /sbin/ip -6 route show [dev <device>]

Example:

  1. /sbin/ip -6 route show dev eth0

2001:0db8:0:f101::/64 proto kernel metric 256 mtu 1500 advmss 1440 fe80::/10 proto kernel metric 256 mtu 1500 advmss 1440 ff00::/8 proto kernel metric 256 mtu 1500 advmss 1440 default proto kernel metric 256 mtu 1500 advmss 1440

7.1.2. Using "route"

Usage:

  1. /sbin/route -A inet6

Example (output is filtered for interface eth0). Here you see different IPv6 routes for different addresses on a single interface.

  1. /sbin/route -A inet6 |grep -w "eth0"

2001:0db8:0:f101 ::/64 :: UA 256 0 0 eth0 <- Interface route for global ¬ address fe80::/10 :: UA 256 0 0 eth0 <- Interface route for link-local ¬ address ff00::/8 :: UA 256 0 0 eth0 <- Interface route for all multicast ¬ addresses

/0 :: UDA 256 0 0 eth0 <- Automatic default route
Retrieved from "https://onnocenter.or.id/wiki/index.php?title=IPv6_Route:_Menambahkan_IPv6_route_melalui_sebuah_gateway&oldid=36984"