Compile Kernel: Konfigurasi Kernel

Sumber: http://www.linuxchix.org/content/courses/kernel_hacking/lesson2

Kernel Hacking Lesson #2: Configure Your Kernel

The Linux kernel comes with several configuration tools. Each one is run by typing make <something>config in the top-level kernel source directory. (All make commands need to be run from the top-level kernel directory.)

   make config

   This is the barebones configuration tool. It will ask each and every configuration question in order. The Linux kernel has a LOT of configuration questions. Don't use it unless you are a masochist.
   make oldconfig

   This will take the config file named .config and only ask the configuration questions which are not already answered in that file. This is most often used when upgrading to a more recent version of the kernel.
   make menuconfig

   This is the kernel hacker mainstay. This command pops up a text-based menu-style configurator using the ncurses library. You can descend into the menus that interest you and change only the configuration options you care about.
   make xconfig, make gconfig

   If you're running Xwindows, these are prettier, clickable versions of menuconfig. They tends to work less often than menuconfig since they are more sensitive to buggy configuration input files than menuconfig (and because more people use menuconfig). xconfig uses the qt libraries, and gconfig uses the gtk libraries.

Each of the configuration programs produces these end products:

   A file named .config in the top-level directory containing all your configuration choices.
   A file named autoconf.h in the include/linux/ directory defining (or not defining) the CONFIG_* symbols so that the C preprocessor knows whether or not they are turned on.

If you have a working .config file for your machine, just copy it into your kernel source directory and run make oldconfig. You should double check the configuration with make menuconfig. If you don't already have a .config file, you can create one by visiting each submenu and turning on or off the options you need. menuconfig and xconfig have a "Help" option that shows you the Configure.help entry for that option, which may help you decide whether or not it should be turned on. RedHat and other distributions often include sample .config files with their distribution specific kernel source in a subdirectory named configs in the top-level source directory. If you are compiling for PowerPC, you have a variety of default configs to choose from in arch/ppc/configs. make defconfig will copy the default ppc config file to .config. If you know another source of default configuration files, let us know.

Tips for configuring a kernel:

Always turn on "Prompt for development... drivers".
From kernel 2.6.8, you can add your own string (such as your initials) at "Local version - append to kernel release" to personalize your kernel version string (for older kernel versions, you have to edit the EXTRAVERSION line in the Makefile).
Always turn off module versioning, but always turn on kernel module loader, kernel modules and module unloading.
In the kernel hacking section, turn on all options except for "Use 4Kb for kernel stacks instead of 8Kb". If you have a slow machine, don't turn on "Debug memory allocations" either.
Turn off features you don't need.
Only use modules if you have a good reason to use a module. For example, if you are working on a driver, you'll want to load a new version of it without rebooting.
Be extra sure you selected the right processor type. Find out what processor you have now with cat /proc/cpuinfo.
Find out what PCI devices you have installed with lspci -v.
Find out what your current kernel has compiled in with dmesg | less. Most device drivers print out messages when they detect a device.

If all else fails, copy a .config file from someone else. The grrls-only list is a good place to ask.

Referensi

http://www.linuxchix.org/content/courses/kernel_hacking/lesson2

Compile Kernel: Konfigurasi Kernel

Referensi

Pranala Menarik

Navigation menu

Search