Instalasi KVM

From OnnoWiki
Revision as of 07:19, 20 December 2010 by Onnowpurbo (talk | contribs) (New page: Prerequisites You will need (see download section): * qemu-kvm-release.tar.gz * kvm-kmod-release.tar.bz2 (if you want/need to compile kernel modules yourself) * A VT capable...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Prerequisites

You will need (see download section):

   * qemu-kvm-release.tar.gz
   * kvm-kmod-release.tar.bz2 (if you want/need to compile kernel modules yourself)
   * A VT capable Intel processor, or an SVM capable AMD processor
   * qemu prerequisites:
         o `zlib` libraries and headers
         o `SDL` libraries and headers
         o `alsa` libraries and headers (optional alsa support: disabled by default but can be enabled with --enable-alsa)
         o `gnutls` libraries and headers (optional VNC TLS support: enabled by default but can be disabled with --disable-vnc-tls)
         o kernel headers (on Fedora, the kernel-devel package) 

On a debian etch system you can install the prerequisites with:

apt-get install gcc libsdl1.2-dev zlib1g-dev libasound2-dev linux-kernel-headers pkg-config libgnutls-dev libpci-dev

Note: When building from git, you also need gawk.

Please report problems (and successes) to the mailing list. [edit] Unpacking and configuring kvm components

You may wish to take a look at the ["Kernel-optimizations"] page. There exists a [attachment:kvm-26-alt-grab.diff.gz patch] which will change the SDL keygrab combination from ctrl-alt to ctrl-alt-shift. It was written primarily to deal with the heavy use of ctrl-alt-delete in NT-based VMs.

If you are using a recent kernel (2.6.25+) with kvm modules included, boot into it, and:

tar xzf qemu-kvm-release.tar.gz cd qemu-kvm-release ./configure --prefix=/usr/local/kvm make sudo make install sudo /sbin/modprobe kvm-intel

  1. or: sudo /sbin/modprobe kvm-amd

If you're using an older kernel, or a kernel from your distribution without the kvm modules, you'll have to compile the modules yourself:

tar xjf kvm-kmod-release.tar.bz2 cd kvm-kmod-release ./configure make sudo make install sudo /sbin/modprobe kvm-intel

  1. or: sudo /sbin/modprobe kvm-amd

Note: if sound doesn't play in the guest vm you can add --audio-drv-list="alsa oss" to ./configure as explained in http://www.linux-kvm.com/content/sound-problem-solved [edit] Creating a disk image for the guest

/usr/local/kvm/bin/qemu-img create -f qcow2 vdisk.img 10G


[edit] Installing a guest operating system

sudo /usr/local/kvm/bin/qemu-system-x86_64 -hda vdisk.img -cdrom /path/to/boot-media.iso \

  -boot d  -m 384

(kvm doesn't make a distinction between i386 and x86_64 so even in i386 you should use `qemu-system-x86_64`)BR

If you have less than 1GB of memory don't use the -m 384 flag (which allocates 384 MB of RAM for the guest). For computers with 512MB of RAM it's safe to use -m 192, or even -m 128 (the default) [edit] Running the newly-installed guest

sudo /usr/local/kvm/bin/qemu-system-x86_64 vdisk.img -m 384

or a slightly more complicated example, where it is assumed that bridged networking is available on tap0; see ["Kernel-optimizations"] for some setup hints:

/usr/local/kvm/bin/qemu-system-x86_64 -hda xp-curr.img -m 512 -soundhw es1370 -no-acpi -snapshot -localtime -boot c -usb -usbdevice tablet -net nic,vlan=0,macaddr=00:00:10:52:37:48 -net tap,vlan=0,ifname=tap0,script=no

(kvm doesn't make a distinction between i386 and x86_64 so even in i386 you should use `qemu-system-x86_64`)

If you're on Debian Etch, substitute `kvm` for `qemu-system-x86_64` (thanks to fromport, soren and mael_). See also the entries under the label "Ubuntu" on the HOWTO page. qemu-system-x86_64`

If you're on Fedora/RHEL/CentOS (and installed a kvm package and not built kvm yourself from source) then substitute qemu-kvm for qemu-system-x86_64


Referensi

Pranala Menarik