WiFi: HotSpot - DD-WRT Printer Sharing

From OnnoWiki
Revision as of 10:42, 5 May 2010 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

DD-WRT Persiapan

  • Masuk ke Web DD-WRT
  • Services -> USB -> USB Support -> US Storage Support Disable
  • Administration -> Management -> JFFS2 Support -> Enable
  • Boot DD-WRT

DD-WRT Konfigurasi di Shell

  • Login SSH ke DD-WRT
root@DD-WRT:~# ls -la /dev/usb/
crw-rw----    1 root     root     180,   0 Jan  1 00:00 lp0

root@DD-WRT:/jffs#  dmesg | grep usb
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17
  • Jika keluar tampilan seperti di atas berarti printer telah terdeteksi.


DD-WRT Instalasi Driver

Install dd-wrt.v24_usb_generic.bin firmware
Enable JFFS, and clear JFFS
Enable SSH
reboot router
Enable All USB options - set mount point to /opt
Since ipkg update seems broken, 
Download http://downloads.openwrt.org/backports/rc5/p910nd_0.7-2_mipsel.ipk to a USB stick formatted with FAT32
Insert USB into router and reboot router
SSH to router
cd /opt
ipkg -d root install p910nd_0.7-2_mipsel.ipk



Harus instalasi driver untuk printer di DD-WRT 

ipkg -force-depends install kmod-usb-printer

Edit /jffs/etc/config/usb.startup and add 

insmod /jffs/lib/modules/2.4.30/printer.o

7. Look at the following files: 

 /jffs/etc/default/p910nd
 /jffs/etc/init.d/p910nd

To do so, type: vi /jffs/etc/default/p910nd. vi is a text editor. You start in "command mode". Press 'a' to switch to editing mode, where you can edit the file. Press 'Esc' to get to command mode. Press :w[enter] to write (save) and :q[enter] to quit without saving, or :wq[enter] to save and quit.

At least on my version of v24, the third line in the startup script had the following line: 

 DEFAULT=/etc/default/p910nd

this was invalid on my router (people more familiar with the router, please correct me here or explain the intricacies involved) and I had to edit this file and change the line to say: 

 DEFAULT=/jffs/etc/default/p910nd

there are two commands that you can run to check if the server is running: 

 root@my-ddwrt-router:/jffs/etc/init.d# netstat -an
 Active Internet connections (servers and established)
 Proto Recv-Q Send-Q Local Address           Foreign Address         State
 tcp        0      0 0.0.0.0:9100            0.0.0.0:*               LISTEN
 tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN

 root@ddwrt-se-office:/jffs/etc/init.d# ps | grep p9100d
 561 root        680 S   p9100d -b -f /dev/usb/lp0 0

If you see a 91xx port listening in netstat and you see the p9100d running in ps, your server is probably up and running properly. Check that the server is not running yet. If not, test starting the the server by issuing: 

 /jffs/etc/init.d/p910nd

For v24_TNG (sp2) versions, the command should be: 

 /jffs/etc/init.d/p910nd start


Di sisi Client

Asumsi Sistem Operasi Ubuntu. Yang perlu dilakukan adalah,

  • scan wireless
  • sambung ke access point linksys
  • system -> administration -> printing
klik New -> Select Device -> Network Printer -> AppSocket/HP JetDirect ->
            Host 192.168.0.1
            Port 9100

Pranala Menarik

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=WiFi:_HotSpot_-_DD-WRT_Printer_Sharing&oldid=18458"