WiFi: HotSpot - CoovaChilli Kebutuhan Hardware dan Software
Hardware Requirements
Any PC with 2 network interfaces.
Software Versions
This howto has been tested with:
* Ubuntu 9.04 i386 server * coova-chilli-1.0.13
Software Installation
For this howto we start with an installation of Ubuntu Linux.
The base installation is beyond the scope of this document, but the Ubuntu Website has plenty of documentation on installing ubuntu from scratch.
Towards the end of the ubuntu server edition install it asks you if you require extra packages. Enable the following:
LAMP SSH server DNS Server
Note:When asked for a mysql password and you want to use the default password for this howto use:
mysqladminsecret
Of course for a live chillispot access point you will need to change all password to your own
If you are using a different version or forget to install extra packages you can install them at a latter date by using the command:
tasksel
Root
To make the installation easier create a root user. Many files can only be changed with root user.
Login user, then enter command:
- sudo passwd root
Enter new UNIX password: Retype new UNIX password:
- su root
Password:
SSH
So we can cut and paste commands to make life easier
Install putty on you windows machine
Assuming that your ubuntu box is connected to your ADSL router/DHCP server you will need to find your IP address of your ubuntu box so you can connect with putty
ifconfig
Type in your ip address and connect
Repository
Use default repository or better
Update Ubuntu
sudo apt-get update
sudo apt-get upgrade
Network setup
Setup up your network hardware/software
Interfaces
nano -w /etc/network/interfaces
auto lo iface lo inet loopback
auto eth0 iface eth0 inet dhcp
auto eth1