Arduino: I2C Scanner untuk DS3231
Revision as of 07:22, 7 June 2018 by Onnowpurbo (talk | contribs) (Created page with "==Hasil== I2C scanner. Scanning ... Found address: 87 (0x57) Found address: 104 (0x68) Done. Found 2 device(s). * 0x68 DS3231 * 0x57 entah apa itu :) .. ==Code==...")
Hasil
I2C scanner. Scanning ... Found address: 87 (0x57) Found address: 104 (0x68) Done. Found 2 device(s).
- 0x68 DS3231
- 0x57 entah apa itu :) ..
Code
// I2C Scanner // Written by Nick Gammon // Date: 20th April 2011 #include <Wire.h> void setup() { Serial.begin (9600); // Leonardo: wait for serial port to connect while (!Serial) { } Serial.println (); Serial.println ("I2C scanner. Scanning ..."); byte count = 0; Wire.begin(); for (byte i = 8; i < 120; i++) { Wire.beginTransmission (i); if (Wire.endTransmission () == 0) { Serial.print ("Found address: "); Serial.print (i, DEC); Serial.print (" (0x"); Serial.print (i, HEX); Serial.println (")"); count++; delay (1); // maybe unneeded? } // end of good response } // end of for loop Serial.println ("Done."); Serial.print ("Found "); Serial.print (count, DEC); Serial.println (" device(s)."); } // end of setup
void loop() {}