IPv6: VyOS: OSPF Sederhana

From OnnoWiki
Revision as of 11:13, 20 January 2019 by Onnowpurbo (talk | contribs) (Created page with " center|900px|thumb ==Sambungan== R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3:...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search



Image6005.gif

Sambungan

R1
eth1: -- R3: eth1
eth2: -- R2: eth1
eth3: -- Internet
R2:
eth1: -- R1: eth2
eth2: -- R3: eth2
eth3: -- LAN 2001:172:16:1::1/64
R3:
eth1: -- R1: eth1
eth2: -- R2: eth2
eth3: -- LAN 2001:192:168:1::1/64


Setiap kali menjalankan VM VyOS di GNS3, lakukan

sudo chown root:useranda /dev/kvm

sebelum me-RUN setiap VM VyOS satu per satu.

IP address

R1:

configure
set interfaces ethernet eth1 address '2001:10:10:1::1/64'
set interfaces ethernet eth2 address '2001:10:10:5::1/64'
set interfaces ethernet eth3 address '2001:192:168:122::100/64'
set interfaces ethernet eth3 address '2001:192:168:122::101/64'
set interfaces ethernet eth3 address '2001:192:168:122::102/64'
show
commit
exit


Router2:

configure
set interfaces ethernet eth1 address '2001:10:10:5::2/64'
set interfaces ethernet eth2 address '2001:10:10:9::1/64'
set interfaces ethernet eth3 address '2001:172:16:1::1/64'
show
commit
exit


Router3:

configure
set interfaces ethernet eth1 address '2001:10:10:1::2/64'
set interfaces ethernet eth2 address '2001:10:10:9::2/64'
set interfaces ethernet eth3 address '2001:192:168:1::1/64'
show
commit
exit

OSPF

Ada tiga (3) elemen dasar konfigurasi OSPF:

  • Enable OSPF instance
  • OSPF area configuration
  • OSPF network configuration

instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.


R1:

configure
set protocols ospf area 0 network 2001:10:10:1::/64
set protocols ospf area 0 network 2001:10:10:5::/64
set protocols ospf log-adjacency-changes
set protocols ospf parameters router-id 10.10.1.1
show
show protocols
commit
exit


R2:

configure
set protocols ospf area 0 network 2001:10:10:5::/64
set protocols ospf area 0 network 2001:10:10:9::/64
set protocols ospf area 0 network 2001:172:16:1::/64
set protocols ospf log-adjacency-changes
set protocols ospf parameters router-id 10.10.1.6
show
show protocols
commit
exit


R3:

configure
set protocols ospf area 0 network 2001:10:10:1::/64
set protocols ospf area 0 network 2001:10:10:9::/64
set protocols ospf area 0 network 2001:192:168:1::/64
set protocols ospf log-adjacency-changes
set protocols ospf parameters router-id 10.10.1.2
show
show protocols
commit
exit

Verify

Cek R1, R2, R3

show ip ospf database 
show ip ospf neighbor
show ip ospf route 
show ip route

Referensi


Pranala Menarik