Cisco: BGP Redistribute OSPF

From OnnoWiki
Revision as of 05:11, 28 December 2018 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

sumber: https://community.cisco.com/t5/routing/ospf-to-bgp-redistribution/td-p/1165332


router ospf 6
router-id x.x.x.x
auto-cost reference-bandwidth 10000
area 38 stub no-summary
timers throttle spf 10 100 5000
timers throttle lsa all 10 100 5000
redistribute bgp 65500 metric 500 subnets
network x.x.x.x 0.0.0.255 area 38
router bgp 65500
no synchronization
bgp log-neighbor-changes
redistribute ospf 6 metric 100 route-map ospf2bgp
neighbor x.x.x.x remote-as xxxx
no auto-summary


Redistribute intra & inter-are

router ospf 1
 network 2.0.0.0 0.255.255.255 area 1
!
router bgp 100
 redistribute ospf 1
!-- This redistributes only OSPF intra- and inter-area routes into BGP.


Redistribute external type-1 type2

Use the external keyword along with the redistribute command under router bgp to redistribute OSPF external routes into BGP. With the external keyword, you have three choices:

  • redistribute both external type-1 and type-2 (Default)
  • redistribute type-1
  • redistribute type-2


interface Ethernet0/0
 ip address 2.2.2.1 255.0.0.0
!
interface Serial1/0
 ip address 3.3.3.1 255.0.0.0
!
router ospf 1
 network 2.0.0.0 0.255.255.255 area 1
!
router bgp 100
 redistribute ospf 1 match external 1 external 2
!--- This redistributes ONLY OSPF External routes, !--- but both type-1 and type-2.
neighbor 3.3.3.3 remote-as 200
!
end


Referensi

Pranala Menarik