Quagga: Dua Router Static Routing
Revision as of 11:20, 24 December 2018 by Onnowpurbo (talk | contribs) (Created page with "center|400px|thumb R1: Ethernet1/1 - ke Internet Ethernet1/2 - R2: Ethernet 1/1 Ethernet1/3 - LAN R2: Ethernet1/1 - R1: Ethernet1/2 Ethernet1/2 - LAN...")
R1:
Ethernet1/1 - ke Internet Ethernet1/2 - R2: Ethernet 1/1 Ethernet1/3 - LAN
R2:
Ethernet1/1 - R1: Ethernet1/2 Ethernet1/2 - LAN
R1:
enable configure terminal ! ! NAT GNS3 gw 192.168.122.1 interface ethernet1/1 ip address 192.168.122.100 255.255.255.0 ip address 192.168.122.101 255.255.255.0 secondary ip address 192.168.122.102 255.255.255.0 secondary ip nat outside no shutdown ip route 0.0.0.0 0.0.0.0 192.168.122.1 ip nat pool no-overload 192.168.122.100 192.168.122.102 prefix 24 ip nat inside source list 7 pool no-overload interface ethernet1/2 ip address 172.16.1.1 255.255.255.252 ip nat inside no shutdown exit interface ethernet1/3 ip address 192.168.1.1 255.255.255.0 ip nat inside no shutdown exit ip route 192.168.2.0 255.255.255.0 172.16.1.2 ! ! access NAT permit ke LAN 192.168.1.0/24 & 192.168.2.0/24 ! 192.168.2.0/24 berada di R2 access-list 7 permit 192.168.1.0 0.0.0.255 access-list 7 permit 192.168.2.0 0.0.0.255 exit copy running-config startup-config
R2:
enable config terminal interface ethernet1/1 ip address 172.16.1.2 255.255.255.252 no shutdown exit interface ethernet1/2 ip address 192.168.2.1 255.255.255.0 no shutdown exit ip route 192.168.1.0 255.255.255.0 172.16.1.1 ip route 0.0.0.0 0.0.0.0 172.16.1.1 exit copy running-config startup-config
Test
R1:
ping 192.168.2.1
R2:
ping 192.168.1.1
Setting Client
LAN 1 Client:
ip 192.168.1.2 gw 192.168.1.1
LAN 2 Client:
ip 192.168.2.2 gw 192.168.2.1