Mikrotik: Router Sederhana
Revision as of 07:42, 25 November 2018 by Onnowpurbo (talk | contribs)
/interface bridge add name=bridge1 /interface bridge port add bridge=bridge1 interface=ether2 add bridge=bridge1 interface=ether3 add bridge=bridge1 interface=ether4 add bridge=bridge1 interface=ethe
ip address add interface=etherX address=XXX.XXX.XXX.XXX ip route add gateway=etherX
ip dns set servers=8.8.8.8 ip dns set allow-remote-request=yes
ip pool add name=pool8 ranges=YYY.YYY.YYY.100-YYY.YYY.YYY.120 ip dhcp-server network add address=YYY.YYY.YYY.0/24 gateway=YYY.YYY.YYY.1 ip dhcp-server add interface=ether8 address-pool=pool8 ip dhcp-server network add dns-server=8.8.8.8 ip dhcp-server enable ip dhcp-server print
ip firewall nat add chain=srcnat out-interface=ether1 action=masquareade ip firewall nat print