WSPR: Persiapan RaspberryPi
Download Raspbian
Download dari
Burn ke SD card
Buang semua partisi dari SD card di /dev/sdb
fdisk /dev/sdb d d d d w
Burn Raspbian IMG ke SD card untuk RaspberryPi dapat mengunakan perintah
sudo su unzip 2016-03-18-raspbian-jessie-lite.zip dd if=2016-03-18-raspbian-jessie-lite.img of=/dev/sdb
akan keluar kira-kira
2658304+0 records in 2658304+0 records out 1361051648 bytes (1,4 GB) copied, 839,032 s, 1,6 MB/s
Pastikan
- File 2016-03-18-raspbian-jessie-lite.img di unzip dari source .zip-nya
- SD card berada di /dev/sdb
Default Username & Password
- Default user raspbian = pi
- Default password raspbian = raspberry
Matikan ipv6
sudo su vi /etc/sysctl.conf
set
net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1
Jalankan
sudo sysctl -p
Instalasi ssh server
sudo su apt-get update apt-get install openssh-server
Perbaiki locale
sudo locale-gen id_ID.UTF-8
Set Interface
Edit
vi /etc/network/interfaces
Isi dengan, misalnya,
iface eth0 inet static
address 192.168.0.15
broadcast 192.168.0.255
netmask 255.255.255.0
gateway 192.168.0.223
atau
iface eth0 inet dhcp
atau
iface eth0 inet manual
atau tambahkan di rc.local
vi /etc/rc.local
isi dengan
ifconfig eth0 192.168.0.15 netmask 255.255.255.0 route add default gw 192.168.0.223 echo "nameserver 8.8.8.8" >> /etc/resolv.conf
Set DNS
vi /etc/resolv.conf
isi dengan
nameserver 8.8.8.8
Instalasi WSPR
Install required packages: sudo apt-get install git g++ make grep mawk ntp Make sure you are using the latest kernel by updating your system. The latest kernel includes fixes wich improve NTP ppm measurement accuracy: sudo apt-get update sudo apt-get dist-upgrade Get code/ compile: rm -rf WsprryPi git clone https://github.com/JamesP6000/WsprryPi.git cd WsprryPi make Install to /usr/local/bin: sudo make install Uninstall: sudo make uninstall