WSPR: Persiapan RaspberryPi
Download Raspbian
Download dari
Burn ke SD card
Buang semua partisi dari SD card di /dev/sdb
fdisk /dev/sdb d d d d w
Burn Raspbian IMG ke SD card untuk RaspberryPi dapat mengunakan perintah
sudo su unzip 2016-03-18-raspbian-jessie-lite.zip dd if=2016-03-18-raspbian-jessie-lite.img of=/dev/sdb
akan keluar kira-kira
2658304+0 records in 2658304+0 records out 1361051648 bytes (1,4 GB) copied, 839,032 s, 1,6 MB/s
Pastikan
- File 2016-03-18-raspbian-jessie-lite.img di unzip dari source .zip-nya
- SD card berada di /dev/sdb
Default Username & Password
- Default user raspbian = pi
- Default password raspbian = raspberry
Matikan ipv6
sudo su vi /etc/sysctl.conf
set
net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1
Jalankan
sudo sysctl -p
Instalasi ssh server
sudo su apt-get update apt-get install openssh-server
Perbaiki locale
sudo locale-gen id_ID.UTF-8
Set Interface
Edit
vi /etc/network/interfaces
Isi dengan, misalnya,
iface eth0 inet static
address 192.168.0.15
broadcast 192.168.0.255
netmask 255.255.255.0
gateway 192.168.0.223
atau
iface eth0 inet dhcp
atau
iface eth0 inet manual
Set DNS
vi /etc/resolv.conf
isi dengan
nameserver 8.8.8.8
Instalasi WSPR
Install required packages: sudo apt-get install git g++ make grep mawk ntp Make sure you are using the latest kernel by updating your system. The latest kernel includes fixes wich improve NTP ppm measurement accuracy: sudo apt-get update sudo apt-get dist-upgrade Get code/ compile: rm -rf WsprryPi git clone https://github.com/JamesP6000/WsprryPi.git cd WsprryPi make Install to /usr/local/bin: sudo make install Uninstall: sudo make uninstall