ROM Android: Compile dari source
Getting Started: Building a Kernel from source
- By Droidzone
What is a Kernel?
The operating system of a device is the part of the device responsible for basic use and administration. This includes the kernel and device drivers, boot loader, command shell or other user interface, and basic file and system utilities. Whereas the user interface is the outermost portition of the operating system, kernel is the innermost. It is the core internals, the software that provides basic services for all other parts of the system, manages hardware and distributes system resources.
Typical components of a kernel are interrupt handlers to service interrupt requests, a scheduler to share processor time among multiple processes, a memory management system to manage process address spaces, and system services like networking and inter-process communication. On modern systems with protected memory management units, the kernel typically resides in an elevated system state as compared to normal user applications. This includes a protected memory space and full access to hardware. This system state and memory space is collectively referred to as kernel-space. Conversely, user applications reside in user-space.
Applications running on the system communicate with the kernel via system calls. An application typically calls functions in a library-Eg The C library–that in turn rely on the system call interface to instruct the kernel to carry out tasks on the application’s behalf.
Our central theme is of course the Android device (a phone, or tablet or any other device), and here, Android is the Operating System. An Android Kernel is essentially a modified Linux Kernel with specific modifications to support the device architecture. I won’t bore you any further with the theoretical aspects of a kernel, and if you’re interested in knowing more about a kernel, read the book, Linux Kernel development, authored by Robert Love.
Without much further ado, let me jump into the topic proper, which is about how to compile an Android Kernel. For this, you’re expected to be familiar with the Linux command line, and know some basic file copying and moving commands. Though a working knowledge of Git would be beneficial, in this tutorial, I will be feeding you with the essential commands on a platter.
I will describe compilation of the HTC Desire Kernel which works with Gingerbread Sense Roms. However the process applies with minor modifications to any Android Device and kernel. The specifics may be variable in how the kernel gets packaged, or flashed. What you need:
A Linux installation (a PC on which a linux distro is installed) or Linux box (May be a live cd or vmware like box). Any linux distro will do, but I assume an Ubuntu installation to simplify the explanation. A toolchain-Either the Android NDK, or your own toolchain Android kernel source code for your device. This tutorial descibes instructions for both the Htc Desire and Samsung Galaxy Note N7100. With minor differences, the method is practically the same for any Android device. Familiarity with the linux shell and basic linux commands.
Each step will be explained as we proceed, so if terms like “toolchain” bother you, don’t worry. It will be explained in detail later. Even if you’re a linux newbie, don’t worry. Almost all commands you need to master this tutorial will be dictated to you. Just make sure you either copy and paste the commands exactly as described here, preserving case (meaning you shouldnt type out “Cp” when the command is given as “cp”. Linux shells are case sensitive. Introduction to the command line for newbies:
As you proceed through this tutorial, you will see various commands in boxes, which may be typed out on your command shell, preserving case and spaces as they appear. As an example, the following is given: ls -l ~/android 1
ls -l ~/android
In this case, the code in the box is a command which should be typed out on the shell (or console).
Common mistakes include typing the following:
(i) LS -L ~/android
wont work as LS and ls are different
(ii) ls -l ~\android
On Linux, “\” the backslash has no role on the command line (An exception is its use in regular expressions and strings, as a means of escaping characters. This won’t be described in this tutorial though, as it’s rather out of scope of our discussion). You need to use “/” or the forward slash.
(iii) ls -l ~\ANDROID
won’t again work, as ANDROID and android are two different files (or directories).
Ok, now that you have a feel for what it’s like, using the linux console, let’s begin the tutorial proper. 1. Getting the source code
At this point, you need to download the source code for your kernel. There are generally, two ways to get kernel source code:
(a) From a compressed archive uploaded by the manufacturer of the device.
(b) From a git repository of another developer.
The tutorial will use the first method.
The HTC Desire source is available from two kinds of resources-you can either get it from htcdevs.com (official HTC Dev site), or from source code uploaded from someone else. For the purpose of this tutorial, I’ll assume we’re working on the official HTC GB source code. So download bravo_2.6.35_gb-mr.tar.gz from htcdevs.com.
In case, you’re working on a Samsung kernel, you can get your source code here.
In many cases, you may find it much easier to reuse another developer’s source code. For this, visit their XDA kernel thread, and search for instructions regarding where they’ve shared their source code. As an example of this method, let’s look at developer g.lewarne‘s source code. His kernel is titled Note2Core Kernel for Galaxy Note II N7100 / N7105 (LTE), and can be found here. If you read the thread, you will see that he has shared his source code at github here. I will describe how to use this, later. 2. Setting up the host PC and preparing source code 2.1 Install some essential linux packages from the Linux terminal:
sudo apt-get install libncurses5-dev 1
sudo apt-get install libncurses5-dev
2.2 Extract the source code
The file you downloaded is a tar archive (like a zip file), so you need to extract it to a convenient location. Let’s hit the linux shell-open a terminal window in linux (Accessories->Terminal)
Let’s start off in our home directory: cd ~/ 1
cd ~/
Now, create the directories for our kernel compilation box: mkdir -p ~/android/kernel 1
mkdir -p ~/android/kernel
Now you need to copy the tar.gz file from wherever you downloaded it to, to this dir. You can use a file explorer GUI like Nautilus or Dolphin.
Extract the archive: tar -xvf ~/android/kernel/bravo_2.6.35_gb-mr.tar.gz cd ~/android/kernel/bravo_2.6.35_gb-mr 1 2
tar -xvf ~/android/kernel/bravo_2.6.35_gb-mr.tar.gz cd ~/android/kernel/bravo_2.6.35_gb-mr
Now we can view the extracted files within the directory: ~/android/kernel/bravo_2.6.35_gb-mr/ 2.3 Set up the toolchain
A toolchain is a set of programs which allow you to compile source code (any source code, not just kernels). The toolchain is specific for the processor and hardware, so we need a toolchain specific for Android and especially the Desire. If you’re a semiadvanced-pro user, you may consider compiling your own toolchain (See theGanymedes’ guide for doing so). If compilation of kernels is all that you require, fortunately for you, there is an easy way-the Android NDK – v7 (latest as of now) is available here
Get the NDK for Linux – android-ndk-r7-linux-x86.tar.bz2 mkdir -p ~/android/ndk 1
mkdir -p ~/android/ndk
Now copy the NDK file to: ~/android/ndk
Whenever I say copy, you have to manually copy the file with any file manager. Nautilus comes with Ubuntu, and Dolphin with Kubuntu. You may also use the shell of course with cp [sourcefile] [destination] 1
cp [sourcefile] [destination]
Extract it: tar -jvxf android-ndk-r7-linux-x86.tar.bz2 1
tar -jvxf android-ndk-r7-linux-x86.tar.bz2
Now add the path for your toolchain to the env variable: gedit ~/.bashrc 1
gedit ~/.bashrc
At the end of the file, add this line:
Code: PATH=$PATH:~/android/ndk/android-ndk-r7-linux-x86/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin 1
PATH=$PATH:~/android/ndk/android-ndk-r7-linux-x86/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin
3. Setting up kernel parameters
Kernels are compiled with a program called gnu make, and use a set of configuration options specified within a file called Makefile.
A vital point to note is that kernels are compiled with a program called gcc (basically the gnu C compiler), and our NDK itself has its own optimized version of gcc. While compiling, we’re actually cross compiling it (meaning compiling a binary package on a system which is different from the actual system which is meant to run it- you’re compiling it on your PC while it’s actually meant to run on your Desire)
This means that when you compile it, you have to make sure that you compile it with the NDK’s version of gcc instead of the system version. Otherwise you end up with a kernel meant to run on your pc, duh! Specifying which gcc to use is by the CROSS_COMPILE variable. You can set it up with this command:
Code: CROSS_COMPILE=arm-linux-androideabi- 1
CROSS_COMPILE=arm-linux-androideabi-
Note the hyphen (-) at the end, and do not forget to include it! At compilation time, system will actually use this variable to find all the programs it needs. Eg: The path for gcc will become arm-linux-androideabi-gcc
We can compile kernels with many different options, like with ext4 support, or without; ext4 support as part of the kernel zImage (in which case it makes the kernel larger), or as a loadable module (of the form somename.ko, which is loaded at init.d/init.rc with the command insmod modulename.ko)
We specify the exact options we require with the help of a useful configuration program called menuconfig (which as the name suggests, is a menu for configuration of make options).
An important thing to note is that as far as kernel compilation is concerned, there are a vast amount of options to setup, and unless you’re thorough with kernel compilation, you wont be able to set up the options correctly and get your kernel to boot. Fortunately for us, the kernel source already comes with a default set of parameters which can be easily set up.
Note that all make commands must be executed within the directory bravo_2.6.35_gb-mr. Let’s go there now: cd ~/android/kernel/bravo_2.6.35_gb-mr make ARCH=arm CROSS_COMPILE=arm-linux-androideabi- bravo_defconfig 1 2
cd ~/android/kernel/bravo_2.6.35_gb-mr make ARCH=arm CROSS_COMPILE=arm-linux-androideabi- bravo_defconfig
This produces a .config file (used by the menuconfig) containing essential parameters to produce a booting kernel for the Desire.
In case you’re not working on the HTC Desire, but a different device, you need to run the defconfig of your device. For this, you need to know the name of the script which runs defconfig. You can get the name by inspecting the names of the files in [kernel source folder]/arch/arm/configs. In fact each file located there is a renamed .config file. Eg: For the Note 2, you will find the file t0_04_defconfig. So to run a defconfig for Note2, you would type: make ARCH=arm CROSS_COMPILE=arm-linux-androideabi- t0_04_defconfig 1
make ARCH=arm CROSS_COMPILE=arm-linux-androideabi- t0_04_defconfig
Note: There is a simpler way to get the basic .config file, and this is to get it from a running kernel built by someone else. You can extract the .config from a running kernel with these commands: cd ~/android/kernel/bravo_2.6.35_gb-mr adb pull /proc/config.gz zcat config.gz > .config 1 2 3
cd ~/android/kernel/bravo_2.6.35_gb-mr adb pull /proc/config.gz zcat config.gz > .config
Note that not every kernel include a config.gz. Your kernel developer needs to have included this option while compiling his kernel
Now we can open menuconfig and add anything we need in addition: make ARCH=arm CROSS_COMPILE=arm-linux-androideabi- menuconfig 1
make ARCH=arm CROSS_COMPILE=arm-linux-androideabi- menuconfig
Advanced: You can view the huge amount of options available in menuconfig, pick and choose the ones you want. As a general word of caution, in your initial compilation, you shouldnt try to modify anything. Just pick the default .config, and compile once. If it succeeds, try booting your system with the kernel, and any default modules like the Wifi module. Once you’ve confirmed that it boots without any bootloops or hangups, you should enable Wifi and confirm that it works. This two stage check is a confirmation that you can compile a default (or stock) kernel, and also successfully compile modules. Once you can, save your .config to a safe location. If you’re using a git version control system (which you should), at this stage, you could also commit your changes, and label them as “Initial commit”. Now, you can go ahead and add changes to the kernel.
You can add ext4 support for example. Once you’re done choosing options, you can exit menuconfig.
Tip: Once you’ve done menuconfig once, and find that you’re always using ARCH=arm and the same CROSS_COMPILE prefix regularly, you can hardcode these options into the main Makefile so you can just type ‘make’ each time for compiling the kernel. Another option is to “export” the prefices before compiling.
Advanced: In fact, once you’ve made your first successful compile, edit your main Makefile (the Makefile that resides in the root folder of the kernel source tree), and change the CROSS_COMPILE variable to point to your toolchain. The Makefile also has a variable for ARCH, which by default is arm. Once you set both of these, you can compile by simply executing: make 1
make
4. Compiling it
This is simple. The basic command is: make -j4 ARCH=arm CROSS_COMPILE=arm-linux-androideabi- 1
make -j4 ARCH=arm CROSS_COMPILE=arm-linux-androideabi-
The -j4 specifies the number of jobs to execute per operation. This is typically equal to the processor cores in your system. If you’re on a VPS with a fair usage policy, you had better keep it a notch below the maximum allowable CPU load.
During compilation, you will see all sorts of messages, which may include warnings too. In most cases, its safe to ignore warnings. If there are errors, the compilation will stop, and you will have to fix the issues.
If you’ve modified your Makefile to include ARCH and CROSS_COMPILE variables as described in the previous section, you can compile simply by running: make 1
make
5. Distributing your kernel to users
At the end of compilation, it generates files named zImage, and various .ko files.
You have to copy them from their default location to a zip file. The best way is to use my variant of koush’s Anykernel, and copy the files to it. Then, you can zip the whole folder and lo and behold-you have your flashable kernel zip which you can distribute to others.
You can also remove the zImage and the modules from /system/lib/modules of any kernel zip available with you, and copy over your files to it, at the correct location.
So, let’s say that you have extracted an existing kernel zip to the location ~/flashable, then the file structure should be like this:
I’ll include my flashable zip directory along with this post. Download file kernel_flashable.tar.bz2.zip to ~/ (Note: I’ll include this file later) cd ~/ tar -jvxf kernel_flashable.tar.bz2.zip 1 2
cd ~/ tar -jvxf kernel_flashable.tar.bz2.zip
This will create the directory structure outlined above.
Now after every compilation of the kernel, execute these commands from where you executed make: cp arch/arm/boot/zImage ~/kernel_flashable find . -name '*ko' -exec cp '{}' ~/kernel_flashable/system/lib/modules/ \; cd ~/kernel_flashable zip -r mykernel ./ 1 2 3 4 5 6 7
cp arch/arm/boot/zImage ~/kernel_flashable
find . -name '*ko' -exec cp '{}' ~/kernel_flashable/system/lib/modules/ \;
cd ~/kernel_flashable
zip -r mykernel ./
This will create mykernel.zip at ~/kernel_flashable. You can distribute this to your users to flash. Make sure you edit updater-script before though. 6. Some kernel compilation errors:
Treat warnings as errors-Solved by removing the string “-Werror” from all Makefiles of the file which failed to compile. Some people had said that the real error (Array out of bounds warning) was because of gcc optimizations. But putting -O2 to -O0 didnt do a thing.
No of jobs - ought not to exceed 50. “warning: variable set but not used [-Wunused-but-set-variable]“-Look at KBUILD_CFLAGS in the main Makefile. Add -Wno-error=unused-but-set-variable to the existing set of flags. Note the following from gcc manual:
-WerrorMake all warnings into hard errors. Source code which triggers warnings will be rejected.
-w Inhibit all warning messages. If you’re familiar with C code and like to fix stuff, rather than ignoring potential bugs, use this only as a last resort- A ‘brahmastram’ (most powerful weapon in your time of gravest need) as the epics would say.
-WerrorMake all warnings into errors.
-Werror=Make the specified warning into an error. The specifier for a warning is appended, for example -Werror=switch turns the warnings controlled by -Wswitch into errors. This switch takes a negative form, to be used to negate -Werror for specific warnings, for example -Wno-error=switch makes -Wswitch warnings not be errors, even when -Werror is in effect. You can use the -fdiagnostics-show-option option to have each controllable warning amended with the option which controls it, to determine what to use with this option.
So what I did to suppress errors was to add: KBUILD_CFLAGS += -w KBUILD_CFLAGS += -Wno-error=unused-but-set-variable 1 2
KBUILD_CFLAGS += -w KBUILD_CFLAGS += -Wno-error=unused-but-set-variable
Though the -Wunused-but-set-variable is not a real issue in itself, it generates so much “noise” that you may miss actual make errors.
This is the error what I was talking about: drivers/net/wireless/bcm4329_204/wl_iw.c: In function 'wl_iw_set_pmksa': drivers/net/wireless/bcm4329_204/wl_iw.c:5075:5: error: array subscript is above array bounds [-Werror=array-bounds] drivers/net/wireless/bcm4329_204/wl_iw.c:5078:5: error: array subscript is above array bounds [-Werror=array-bounds] 1 2 3
drivers/net/wireless/bcm4329_204/wl_iw.c: In function 'wl_iw_set_pmksa': drivers/net/wireless/bcm4329_204/wl_iw.c:5075:5: error: array subscript is above array bounds [-Werror=array-bounds] drivers/net/wireless/bcm4329_204/wl_iw.c:5078:5: error: array subscript is above array bounds [-Werror=array-bounds]
Solution:
Edit drivers/net/wireless/bcm4329_204/Makefile
Locate -Werror within DHDCFLAGS, and delete it. DHDCFLAGS = -DLINUX -DBCMDRIVER -DBCMDONGLEHOST -DDHDTHREAD -DBCMWPA2 \ -DUNRELEASEDCHIP -Dlinux -DDHD_SDALIGN=64 -DMAX_HDR_READ=64 \ -DDHD_FIRSTREAD=64 -DDHD_GPL -DDHD_SCHED -DBDC -DTOE -DDHD_BCMEVENTS \ -DSHOW_EVENTS -DBCMSDIO -DDHD_GPL -DBCMLXSDMMC -DBCMPLATFORM_BUS \ -Wall -Wstrict-prototypes -Werror -DOOB_INTR_ONLY -DCUSTOMER_HW2 \ -DDHD_USE_STATIC_BUF -DMMC_SDIO_ABORT -DWLAN_PFN -DWLAN_PROTECT \ -DBCMWAPI_WPI \ 1 2 3 4 5 6 7
DHDCFLAGS = -DLINUX -DBCMDRIVER -DBCMDONGLEHOST -DDHDTHREAD -DBCMWPA2 \ -DUNRELEASEDCHIP -Dlinux -DDHD_SDALIGN=64 -DMAX_HDR_READ=64 \ -DDHD_FIRSTREAD=64 -DDHD_GPL -DDHD_SCHED -DBDC -DTOE -DDHD_BCMEVENTS \ -DSHOW_EVENTS -DBCMSDIO -DDHD_GPL -DBCMLXSDMMC -DBCMPLATFORM_BUS \ -Wall -Wstrict-prototypes -Werror -DOOB_INTR_ONLY -DCUSTOMER_HW2 \ -DDHD_USE_STATIC_BUF -DMMC_SDIO_ABORT -DWLAN_PFN -DWLAN_PROTECT \ -DBCMWAPI_WPI \
This will prevent gcc from treating mere warnings as errors. 7. Modifying Kernel source code on the fly – Applying Kernel Patches
Ok, you have compiled a simple stock kernel. Now what? Would you like to add fixes/mods developed by other kernel devs? This post explains patches and how exactly to do this.
Patches to the kernel are applied via patch files. Patch files are simple text files generated by the linux diff program which takes two text files, compares them and writes the differences (hence called diff) to another text file which by convention has the extension .patch 7.1 Example patch
Following is a patch containing my “Extended battery” fix with Sibere’s battfix. I’ll explain patching with this. Let’s understand the patch file. Open it up in any text editor. diff -rupN -X /home/droidzone/android/kernel/exclude.opts bravo_2.6.35_gb-mr/drivers/power/ds2784_battery.c bravo_2.6.35_gb-mr.main//drivers/power/ds2784_battery.c --- bravo_2.6.35_gb-mr/drivers/power/ds2784_battery.c 2011-08-25 13:16:53.000000000 +0530 +++ bravo_2.6.35_gb-mr.main//drivers/power/ds2784_battery.c 2011-11-06 16:43:21.544317342 +0530 @@ -118,8 +118,11 @@ PS. 0 or other battery ID use the same p /* Battery ID = 1: HT-E/Formosa 1400mAh */ #define BATT_ID_A 1 #define BATT_FULL_MAH_A 1400 - #define BATT_FULL_MAH_DEFAULT 1500 +#define BATT_FULL_MAH_CAMERONSINO 2400 +#define BATT_ID_CAMERONSINO +#define BATT_TYPE 0 + 1 2 3 4 5 6 7 8 9 10 11 12 13
diff -rupN -X /home/droidzone/android/kernel/exclude.opts bravo_2.6.35_gb-mr/drivers/power/ds2784_battery.c bravo_2.6.35_gb-mr.main//drivers/power/ds2784_battery.c --- bravo_2.6.35_gb-mr/drivers/power/ds2784_battery.c 2011-08-25 13:16:53.000000000 +0530 +++ bravo_2.6.35_gb-mr.main//drivers/power/ds2784_battery.c 2011-11-06 16:43:21.544317342 +0530 @@ -118,8 +118,11 @@ PS. 0 or other battery ID use the same p /* Battery ID = 1: HT-E/Formosa 1400mAh */
- define BATT_ID_A 1
- define BATT_FULL_MAH_A 1400
-
- define BATT_FULL_MAH_DEFAULT 1500
+#define BATT_FULL_MAH_CAMERONSINO 2400 +#define BATT_ID_CAMERONSINO +#define BATT_TYPE 0 +
Note the first line: diff -rupN -X /home/droidzone/android/kernel/exclude.opts bravo_2.6.35_gb-mr/drivers/power/ds2784_battery.c bravo_2.6.35_gb-mr.main//drivers/power/ds2784_battery.c 1
diff -rupN -X /home/droidzone/android/kernel/exclude.opts bravo_2.6.35_gb-mr/drivers/power/ds2784_battery.c bravo_2.6.35_gb-mr.main//drivers/power/ds2784_battery.c
diff -rupN basically describes the command that was used to generate this patch. The -u means that the patch file is something called a universal patch
bravo_2.6.35_gb-mr/drivers/power/ds2784_battery.c was the original file, and bravo_2.6.35_gb-mr.main//drivers/power/ds2784_battery.c was the target file or file which contains the mod. 7.2 How to apply patch files
The command depends on where your current directory is. If you’re in ~/android/kernel/bravo_2.6.35_gb-mr/ and your current directory contains the directory ‘drivers’, you can apply this patch with this command: patch -p1<extended_battfix.patch 1
patch -p1<extended_battfix.patch
If you’re within drivers, then you have to modify the command like this: patch -p2<extended_battfix.patch 1
patch -p2<extended_battfix.patch
Hope you get the gist. Basically, as you move into the source tree, you have to increment the patch level by the number of directories you’ve moved down into. Very simple, isnt it? 8. Sharing and Collaborating – Using Github and Commits
Kernel compilation is a group effort (at least it ought to be). When different devs work on different parts of the code and create their own mods, development progresses. For this purpose, it is important that you share your code with other devs. The best way to do this to upload your sources to github.
First, create a github account.
Next you can view other devs’ github sources and examine their commits. Commits are basically patches applies to the previous source uploaded. Github commits use the universal patch format and can be viewed directly, downloaded as patch files, and applied to your code. You can also choose to download the whole source tree uploaded by another dev and examine it.