OpenBTS: RangeNetwork Compile

From OnnoWiki
Revision as of 07:08, 14 January 2014 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

Update

cd /home/openbts/software
svn co http://wush.net/svn/range/software/public public

Install liba53

You will also need to install liba53, which is included with the distribution. The following commands should install it correctly from the OPENBTS_ROOT
cd a53/trunk
sudo make install


Building OpenBTS

OpenBTS should, in principle, build and run on any Unix-like operating system, including 64-bit. However, in practice, most of our development is done on Ubuntu 10 or 12.04 LTS systems, so these are best-supported. Range Networks RAD1

Building for Range equipment is easiest, as it has no external dependencies. Just run the following commands:

cd openbts/trunk
autoreconf -i
./configure
make

With the build resolved, you'll need to build and link the transceiver appropriate for your hardware. For a Range Networks basestation unit these links are

(from OpenBTS root)

cd apps
make
ln -s ../TransceiverRAD1/transceiver .
ln -s ../TransceiverRAD1/ezusb.ihx .
ln -s ../TransceiverRAD1/fpga.rbf .


Referensi