UBNT: Teknik Recovery

Kalau salah flash firmware langkah yang perlu dilakukan

• Set IP PC 192.168.1.x
• Turn off the device
• Press the reset button
• Turn on the device
• Release the reset button ~10 seconds (but not longer) after turning the device on. You will know it's ready when the LEDs change.
• Ping 192.168.1.20. If it works, you're ready to upload an image, if not, go back to step 1.
• tftp the image in binary mode to 192.168.1.20 as 'flash_update'.

• Tekan Tombol Reset UBNT
• ping

ping 192.168.1.20

• jika dapat responds dari ping
• lakukan tftp

tftp 192.168.1.20
tftp> binary
tftp> trace
tftp> put image.bin flash_update

Pranala Menarik

• UBNT: Teknik Recovery
• UBNT: Rebuild Firmware
• UBNT: openwrt
• UBNT: olsr dengan openwrt
• OLSR - di UBNT