UBNT: Teknik Recovery

From OnnoWiki
Revision as of 20:13, 20 July 2012 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

Kalau salah flash firmware langkah yang perlu dilakukan


  • Set IP PC 192.168.1.x
  • Turn off the device
  • Press the reset button
  • Turn on the device
  • Release the reset button ~10 seconds (but not longer) after turning the device on. You will know it's ready when the LEDs change.
  • Ping 192.168.1.20. If it works, you're ready to upload an image, if not, go back to step 1.
  • tftp the image in binary mode to 192.168.1.20 as 'flash_update'.
  • Tekan Tombol Reset UBNT
  • ping
ping 192.168.1.20
  • jika dapat responds dari ping
  • lakukan tftp
tftp 192.168.1.20
tftp> binary
tftp> trace
tftp> put image.bin flash_update
Retrieved from "https://onnocenter.or.id/wiki/index.php?title=UBNT:_Teknik_Recovery&oldid=32986"