Debian: network bonding
Revision as of 05:46, 27 February 2022 by Onnowpurbo (talk | contribs)
Install
apt-get install ifenslave apt -y install ifenslave
modprobe bonding modprobe 8021q
echo 'bonding' >> /etc/modules echo '8021q' >> /etc/modules
Interface Down
ifdown eth0 (Repeat for all interfaces included in the bond) ifdown enp3s0 ifdown enp2s0 /etc/init.d/networking stop
Edit
vi /etc/network/interfaces
# The primary network interface
allow-hotplug enp2s0
allow-hotplug enp3s0
auto enp2s0
iface enp2s0 inet dhcp
#iface enp2s0 inet static
# address 192.168.0.7
# netmask 255.255.255.0
# network 192.168.0.0
# gateway 192.168.0.222
auto enp3s0
iface enp3s0 inet dhcp
# iface enp3s0 inet static
# address 192.168.0.8
# netmask 255.255.255.0
# network 192.168.0.0
# gateway 192.168.0.222
auto bond0
iface bond0 inet static
address 192.168.0.7
netmask 255.255.255.0
gateway 192.168.0.222
bond-slaves enp2s0 enp3s0
# bond-mode 0 = round robin
# bond-mode 4 = 802.3ad AKA LACP
bond-mode 0
bond-miimon 100
bond-downdelay 200
bond-updelay 200
# bond-lacp-rate 1
# bond-xmit-hash-policy layer2+3
# up ifconfig bond0 0.0.0.0 up