Mikrotik: Router Sederhana

Topologi di GNS3

Konfigurasi Mikrotik

/ip dhcp-client print
/ip dhcp-client add interface=ether1 disable=no

/interface bridge
add name=bridge1
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ethe...dst

/ip address add interface=bridge1 address=192.168.100.1/24
/ip route add gateway=bridge1

/ip dns set servers=8.8.8.8
/ip dns set allow-remote-request=yes

/ip firewall nat add chain=srcnat out-interface=ether1 action=masquerade
/ip firewall nat print

Setup DHCP Server dapat menggunakan

/ip dhcp-server setup

Chat saat konfigurasi DHCP Server

Select interface to run DHCP server on 
dhcp server interface: bridge1 - ketik nama bridge interface

Select network for DHCP addresses 
dhcp address space: 192.168.100.0/24 - sesuai IP bridge1 & [ENTER]

Select gateway for given network 
gateway for dhcp network: 192.168.100.1 - sesuai IP bridge1 & [ENTER]

Select pool of ip addresses given out by DHCP server 
addresses to give out: 192.168.100.2-192.168.100.254 - [ENTER]

Select DNS servers 
dns servers: 192.168.1.1 - [ENTER] - bisa 8.8.8.8

Select lease time 
lease time: 10m - [ENTER]

Aktifkan DHCP Server

/ip dhcp-server enable
/ip dhcp-server print

Cek Client Connection

Di VPCS1, cek sambungan dapat menggunakan perintah

show ip   - lihat apakah VPCS dapat / mempunyai IP address
ip dhcp   - untuk meminta IP address ke DHCP Server.
ping x.x.x.x - ping ke IP x.x.x.x

atau set menggunakan IP statik

ip c.c.c.c/m g.g.g.g 

Dimana

c.c.c.c = biasanya 192.168.100.x - IP address client di sesuaikan dengan konfigurasi jaringan yang ada
m       = biasanya 24          - netmask
g.g.g.g = IP address gateway di jaringan

Di kali linux, cek sambungan dapat menggunakan perintah

netstat -nr   - lihat tabel routing
ifconfig      - lihat konfigurasi jaringan
dhclient eth0 - meminta IP address ke DHCP Server

Biasanya kali linux akan lebih reliable daripada VPCS.

Pranala Menarik

• Mikrotik