IPv6: Cisco: konfigurasi interface
Revision as of 16:16, 5 January 2019 by Onnowpurbo (talk | contribs)
enable
configure terminal
ipv6 unicast-routing
interface type number
ipv6 address ipv6-prefix /prefix-length
ipv6 address ipv6-prefix /prefix-length eui-64
ipv6 address ipv6-address / prefix-length link-local
ipv6 enable
no shutdown
exit
Contoh
enable
configure terminal
ipv6 unicast-routing
interface ethernet1/0
ipv6 address 2001::1/64
ipv6 enable
no shutdown
end
Dual stack IPv4 & IPv6. Multiple IPv6 link-local addresses on an interface are not supported.
enable
configure terminal
ipv6 unicast-routing
interface ethernet1/0
ip address 192.168.99.1 255.255.255.0
ipv6 address 2001:1:2:3:4::/64 eui-64
no shutdown
exit
end
Cek
# cek ipv6 interface # show ipv6 interface ping ipv6 2001::1
show ipv6 access-list show ipv6 cef # Cisco Express Forward show ipv6 interface interface-id show ipv6 mtu show ipv6 neighbors show ipv6 ospf show ipv6 prefix-list show ipv6 protocols show ipv6 rip show ipv6 route show ipv6 routers show ipv6 static show ipv6 traffic