Juniper: Shutdown Reboot

Reset / Meng-NOL-kan System

request system zeroize

Power off

request system power-off

Halt

request system halt

• Wait until a message appears on the console confirming that the operating system has halted. For information about the request system halt command, see the Junos OS command documentation.
• Disconnect power from the switch by pulling out the male end of the power cord connected the power source outlet.

Reboot

request system reboot

This command will also notify other users connected to the switch about the operation.

To restart the switch from the front panel:

• From the LCD front panel menu push the Menu button.
• When the MAIN MENU (Maintenance menu) appears, press the Enter button.
• Select the SYSTEM REBOOT option and press the Enter button.
• To exit the menu without rebooting the switch, press the Menu button again.

Pranala Menarik

• Juniper