Arduino: Serial Parse Integer

Sumber: https://github.com/tigoe/ArduinoGeneralExamples/blob/master/SerialNumericParser/SerialNumericParser.ino

Code

/*
Serial input with parsing
This example shows how to read a serial stream of
comma-separated values, parse the ASCII numeric strings
int numeric variables, and use them.
The circuit:
* LEDs on pins 5 and 6. But could be used for many things.
created 7 May 2013
by Tom Igoe
This example code is in the public domain.
*/

void setup() {
  Serial.begin(9600);
}

void loop() {
  // Assumes a string in from the serial port like so:
  // s ledNumber, brightness \n
  // for example: "s5,200\n":
  int ledNumber = 0;
  int brightness = 0;
  
  if (Serial.find("s")) {
    ledNumber = Serial.parseInt(); // parses numeric characters before the comma
    brightness = Serial.parseInt();// parses numeric characters after the comma
    // print the results back to the sender:
    Serial.print("LED number: " );
    Serial.print(ledNumber);
    Serial.print(" at ");
    Serial.println(brightness);
    // set the LED:
    analogWrite(ledNumber, brightness);
    }
 }

Referensi

• https://github.com/tigoe/ArduinoGeneralExamples/blob/master/SerialNumericParser/SerialNumericParser.ino