OLSR - di Ubuntu

From OnnoWiki
Jump to navigation Jump to search

Sumber: http://wmunguiam.blogspot.com/2009/01/olsr-over-ubuntu-804.html

Pada dasarnya ada dua (2) cara utk mengaktifkan OLSR di Ubuntu, yaitu

Instalasi OLSRD dari repository

OLSR dapat di instalasi langsung dari repository menggunakan perintah

sudo apt-get install olsrd olsrd-plugins

hanya saja ini biasanya bukan versi bleeding edge :)

Compile dari Source Code

Siapkan aplikasi pendukung

sudo apt-get install kernel-package libncurses5-dev fakeroot wget \
bzip2 g++ libssl-dev libxml2-dev doxygen bison flex libc6

Download source code dari

http://www.olsr.org/?q=download

Copy, Extract dan Compile

cp olsrd-0.6.2.tar.bz2 /usr/local/src/
cd /usr/local/src
tar jxvf olsrd-0.6.2.tar.bz2 
cd /usr/local/src/olsrd-0.6.2
make all
make install

Sedikir catatan tentang olsrd

========= C O N F I G U R A T I O N - F I L E ============
olsrd uses the configfile /etc/olsrd.conf
a default configfile. A sample RFC-compliance aimed
configfile can be found in olsrd.conf.default.rfc.
However none of the larger OLSRD using networks use that
so install a configfile with activated link quality exstensions
per default.
can be found at files/olsrd.conf.default.lq
==========================================================

Edit OLSRD.CONF

Edit olsrd.conf

sudo cp /etc/olsrd.conf /etc/olsrd.conf.original
sudo vi /etc/olsrd.conf

Contoh konfigurasi sederhana

InterfaceDefaults {
    Ip4Broadcast      255.255.255.255
}
Interface "eth1" {
   # Ip4Broadcast 255.255.255.255
   # Ip6AddrType site-local
   # Ip6MulticastSite ff05::11
   # Ip6MulticastGlobal ff0e::1

   HelloInterval 6.0
   HelloValidityTime 600.0
   TcInterval 0.5
   TcValidityTime 300.0
   MidInterval 10.0
   MidValidityTime 300.0
   HnaInterval 10.0
   HnaValidityTime 300.0
   # Weight 0
   # LinkQualityMult 192.168.0.1 0.5
   }

Edit Interface

Kita dapat melakukannya menggunakan

  • iwconfig di console
  • edit /etc/network/interface

Dengan asumsi eth1 adalah interface wireless. Edit di console

iwconfig eth1 mode ad-hoc
iwconfig eth1 essid MESH
iwconfig eth1 ap 02:ca:ff:ee:ba:be
iwconfig eth1 channel 1
ifconfig eth1 172.16.1.2
ifconfig eth1 netmask 255.255.0.0 

atau

iwconfig eth1 mode ad-hoc essid MESH ap 02:ca:ff:ee:ba:be channel 1
ifconfig eth1 172.16.1.2 netmask 255.255.0.0


Edit

vi /etc/network/interfaces

Isi kira-kira sebagi berikut

   auto lo
   iface lo inet loopback

   auto eth1
   allow-hot plug eth1
   iface eth1 inet static
   address 172.16.1.2
   broadcast 172.16.255.255
   netmask 255.255.0.0
   wireless-mode ad-hoc
   wireless-channel 1
   wireless-essid MESH
   wireless-bssid 02:ca:ff:ee:ba:be

   auto wlan0
   allow-hot plug wlan0
   iface wlan0 inet static
   address 10.10.10.11
   netmask 255.255.255.0
   wireless-mode ad-hoc
   wireless-channel 11
   wireless-key s:12345
   wireless-essid mesh

   #auto eth0
   #iface eth0 inet dhcp

Restart Networking

networking and OLSR

sudo /etc/init.d/networking restart
sudo /etc/init.d/olsrd start

Jika kita mengcompile OLSR lakukan

sudo olsrd -d 2


Jika pada saat melakukan

sudo /etc/init.d/network restart

Keluar error berikut

Error for wireless request "Set Mode" (8B06) :
SET failed on device wlan0 ; Invalid argument.
Error for wireless request "Set Mode" (8B06) :
SET failed on device wlan0 ; Device or resource busy.

Kemungkinan wireless interface / hardware yang anda gunakan tidak mendukung mode ad-hoc. Kita perlu menggunakan USB wireless card lain.

Verifikasi Jaringan

Asumsinya eth1 adalah interface WLAN.

ifconfig eth1
eth1      Link encap:Ethernet  HWaddr 00:21:00:50:a3:90  
          inet addr:172.16.1.2  Bcast:172.16.255.255  Mask:255.255.0.0
          inet6 addr: fe80::221:ff:fe50:a390/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:52 errors:0 dropped:0 overruns:0 frame:188
          TX packets:88 errors:11 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3356 (3.3 KB)  TX bytes:14387 (14.3 KB)
          Interrupt:17 

Cek wireless

iwconfig eth1
eth1      IEEE 802.11bg  ESSID:"MESH"  
          Mode:Ad-Hoc  Frequency:2.412 GHz  Cell: 02:CA:FF:EE:BA:BE   
          Bit Rate=54 Mb/s   Tx-Power:24 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=5/5  Signal level=-21 dBm  Noise level=-57 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0 

Cek Routing

netstat -nr
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG        0 0          0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth1
172.16.0.0      0.0.0.0         255.255.0.0     U         0 0          0 eth1
192.168.1.0     0.0.0.0         255.255.255.0   U         0 0          0 eth0

Referensi

Pranala Menarik