Ushare

From OnnoWiki
Revision as of 19:27, 16 May 2011 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search
At first you need to be sure that you have setup a multicast route for UPnP messages. If you don't but have a default route attributed, then this later will be used. Otherwise, simply declare a new route for UPnP multicasts (for example using eth0 interface) :

route add -net 239.0.0.0 netmask 255.0.0.0 eth0

uShare runs from the console only. It supports the usual --help option which displays usage and option information.

Options:

  -n, --name=NAME              Set UPnP Friendly Name (default is 'uShare')
  -i, --interface=IFACE        Use IFACE Network Interface (default is 'eth0')
  -f, --cfg=FILE               Config file to be used
  -p, --port=PORT              Forces the HTTP server to run on PORT
  -q, --telnet-port=PORT       Forces the TELNET server to run on PORT
  -c, --content=DIR            Share the content of DIR directory (default is './')
  -w, --no-web                 Disable the control web page (enabled
       by default)
  -t, --no-telnet              Disable the TELNET control (enabled by default)
  -o, --override-iconv-err     If iconv fails parsing name, still add to media contents (hoping the renderer can handle it)
  -v, --verbose                Set verbose display.
  -x, --xbox                   Use XboX 360 compliant profile
  -d, --dlna                   Use DLNA compliant profile (PlayStation3 needs this)
  -D, --daemon                 Run as a daemon.
  -V, --version                Display the version of uShare and exit
  -h, --help                   Display this help

uShare expects at least one directory argument (-c argument), specifying where multimedia files are stored. You should probably also use the -i option to specify which interface uShare should listen on.

ushare -c /shares ushare -c /shares1 --content=/shares2

You can also perform remote control of uShare UPnP Media Server through its web interface. This let you define new content locations at runtime or update the currently shared one in case the filesystem has changed.

Just go to :

http://ip_address:port/web/ushare.html

See the manual page for more details :

man ushare

top Supported File Formats List

   * Video files: asf, avi, dv, divx, wmv, mjpg, mjpeg, mpeg, mpg, mpe, mp2p, vob, mp2t, m1v, m2v, m4v, m4p, mp4ps, ts, ogm, mkv, rmvb, mov, qt, hdmov
   * Audio files: aac, ac3, aif, aiff, at3p, au, snd, dts, rmi, mp1, mp2, mp3, mp4, mpa, ogg, wav, pcm, lpcm, l16, wma, mka, ra, rm, ram, flac
   * Images files: bmp, ico, gif, jpeg, jpg, jpe, pcd, png, pnm, ppm, qti, qtf, qtif, tif, tiff
   * Playlist files: pls, m3u, asx
   * Subtitle files: dks, idx, mpl, pjs, psb, scr, srt, ssa, stl, sub, tts, vsf, zeg
   * Various text files: bup, ifo


Referensi

Pranala Menarik