Difference between revisions of "Mikrotik: Router Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 71: | Line 71: | ||
atau set menggunakan IP statik | atau set menggunakan IP statik | ||
| − | ip | + | ip 192.168.100.x/24 192.168.100.1 |
Dimana | Dimana | ||
| − | + | 192.168.100.x/24 - IP address client di konfigurasi Mikrotik di atas adalah keluarga 192.168.100.x/24 | |
| − | + | 192.168.100.1 - IP address gateway di jaringan | |
| − | |||
Di kali linux, cek sambungan dapat menggunakan perintah | Di kali linux, cek sambungan dapat menggunakan perintah | ||
| Line 86: | Line 85: | ||
Biasanya kali linux akan lebih reliable daripada VPCS. | Biasanya kali linux akan lebih reliable daripada VPCS. | ||
| − | |||
| − | |||
==Pranala Menarik== | ==Pranala Menarik== | ||
* [[Mikrotik]] | * [[Mikrotik]] | ||
Revision as of 10:07, 27 March 2020
Topologi di GNS3
Konfigurasi Mikrotik
/ip dhcp-client print /ip dhcp-client add interface=ether1 disable=no /interface bridge add name=bridge1 /interface bridge port add bridge=bridge1 interface=ether2 add bridge=bridge1 interface=ether3 add bridge=bridge1 interface=ether4 add bridge=bridge1 interface=ethe...dst /ip address add interface=bridge1 address=192.168.100.1/24 /ip route add gateway=bridge1 /ip dns set servers=8.8.8.8 /ip dns set allow-remote-request=yes
/ip firewall nat add chain=srcnat out-interface=ether1 action=masquerade /ip firewall nat print
Setup DHCP Server dapat menggunakan
/ip dhcp-server setup
Chat saat konfigurasi DHCP Server
Select interface to run DHCP server on dhcp server interface: bridge1 - ketik nama bridge interface
Select network for DHCP addresses dhcp address space: 192.168.100.0/24 - sesuai IP bridge1 & [ENTER]
Select gateway for given network gateway for dhcp network: 192.168.100.1 - sesuai IP bridge1 & [ENTER]
Select pool of ip addresses given out by DHCP server addresses to give out: 192.168.100.2-192.168.100.254 - [ENTER]
Select DNS servers dns servers: 192.168.1.1 - [ENTER] - bisa 8.8.8.8
Select lease time lease time: 10m - [ENTER]
Aktifkan DHCP Server
/ip dhcp-server enable /ip dhcp-server print
Cek Client Connection
Di VPCS1, cek sambungan dapat menggunakan perintah
show ip - lihat apakah VPCS dapat / mempunyai IP address ip dhcp - untuk meminta IP address ke DHCP Server. ping x.x.x.x - ping ke IP x.x.x.x
atau set menggunakan IP statik
ip 192.168.100.x/24 192.168.100.1
Dimana
192.168.100.x/24 - IP address client di konfigurasi Mikrotik di atas adalah keluarga 192.168.100.x/24 192.168.100.1 - IP address gateway di jaringan
Di kali linux, cek sambungan dapat menggunakan perintah
netstat -nr - lihat tabel routing ifconfig - lihat konfigurasi jaringan dhclient eth0 - meminta IP address ke DHCP Server
Biasanya kali linux akan lebih reliable daripada VPCS.