Difference between revisions of "Cisco: NAT Dua Router Static Routing"

From OnnoWiki
Jump to navigation Jump to search
(Created page with "center|400px|thumb R1: Ethernet1/1 - ke Internet Ethernet1/2 - R2: Ethernet 1/1 Ethernet1/3 - LAN R2: Ethernet1/1 - R1: Ethernet1/2 Ethernet1/2 - LAN...")
 
Line 59: Line 59:
 
  ping 192.168.1.1
 
  ping 192.168.1.1
  
−
 
−
==Tambahan Kalau Membutuhkan NAT==
 
−
 
−
Menggunakan NAT untuk Memungkinkan Pengguna Internal Mengakses Internet
 
−
 
−
Jalankan langkah ini untuk memungkinkan pengguna internal anda mengakses Internet dan menyimpan alamat di kumpulan alamat global di dalam menggunakan kelebihan alamat global.
 
−
 
−
SUMMARY STEPS
 
−
 
−
enable
 
−
configure terminal
 
−
ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length }
 
−
access-list access-list-number permit source [source-wildcard ]
 
−
ip nat inside source list access-list-number pool name overload
 
−
interface type number
 
−
ip address ip-address mask
 
−
ip nat inside
 
−
exit
 
−
interface type number
 
−
ip address ip-address mask
 
−
ip nat outside
 
−
end
 
−
 
−
R1:
 
−
 
−
enable
 
−
configure terminal
 
−
ip nat pool net-168.1 192.168.1.1 192.168.1.254 netmask 255.255.255.0
 
−
access-list 1 permit 192.168.1.0 0.0.0.255
 
−
ip nat inside source list 1 pool net-168.1 overload
 
−
interface ethernet1/3
 
−
! ip address 192.168.1.1 255.255.255.0
 
−
ip nat inside
 
−
exit
 
−
interface ethernet1/1
 
−
! ip address 10.10.0.1 255.255.255.0
 
−
! ip address dhcp
 
−
ip nat outside
 
−
end
 
−
 
−
 
−
 
−
===Referensi===
 
−
 
−
* https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/iadnat-addr-consv.html
 
  
 
==Setting Client==
 
==Setting Client==

Revision as of 15:13, 23 December 2018

SR1.png


R1: 

Ethernet1/1 - ke Internet
Ethernet1/2 - R2: Ethernet 1/1
Ethernet1/3 - LAN

R2: 

Ethernet1/1 - R1: Ethernet1/2
Ethernet1/2 - LAN


R1: 

enable
configure terminal
  interface ethernet1/1
    ip address dhcp
    ip dhcp client request
    no shutdown
    exit
  interface ethernet1/2
    ip address 172.16.1.1 255.255.255.252
    no shutdown
    exit
  interface ethernet1/3
    ip address 192.168.1.1 255.255.255.0
    exit
  ip route 192.168.2.0 255.255.255.0 172.16.1.2
  exit
copy running-config startup-config

R2: 

enable
config terminal
   interface ethernet1/1
    ip address 172.16.1.2 255.255.255.252
    no shutdown
    exit
  interface ethernet1/2
    ip address 192.168.2.1 255.255.255.0
    exit
  ip route 192.168.1.0 255.255.255.0 172.16.1.1
  ip route 0.0.0.0 0.0.0.0 172.16.1.1
  exit
copy running-config startup-config


Test

R1: 

ping 192.168.2.1

R2: 

ping 192.168.1.1


Setting Client

LAN 1 Client: 

ip 192.168.1.2
gw 192.168.1.1


LAN 2 Client: 

ip 192.168.2.2
gw 192.168.2.1


Pranala Menarik

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=Cisco:_NAT_Dua_Router_Static_Routing&oldid=53465"