UBNT: olsr dengan openwrt

Sumber: http://wiki.ubnt.com/OLSR_on_OpenWrt

Tulisan ini menerangkan cara menginstalasi, konfigurasi dan monitor OLSR di Ubiquiti Device dengan OpenWRT yang di install.

Kebutuhan

• Komputer dengan Browser (mis. Firefox) dan ssh client.
• Ubiquity Device dengan OpenWRT yang sudah terinstalasi. Pastikan menggunakan kamikaze firmware

http://kamikaze.openwrt.org/8.09.2/atheros/

• Akses Interent yang berlaku untuk Device & Computer

Instalasi

• Pastikan kita sudah menset root password & akses ssh ke device
• ssh ke device, misalnya

ssh root@192.168.1.1

• update opkg.list

opkg update

• install luci administration UI & olsr show

opkg install olsrd
opkg install luci-admin-full olsrd-luci

Konfigurasi

Configure OLSR configuration page in Luci UI Package installation page in Luci UI

5. Log in into the Luci UI typing the address of the router in your favourite web browser and using the root password

6. Go to Services>OLSR and configure the daemon. Image show valid generic settings.

7. You can install additional packages in System>Process. Luci compatible OLSR plugins start with olsr-luci-*. Then configure them in Services>OLSR>Plugins Monitor OLSR status page in Luci UI

8. Go to Status>OLSR and you'll find the "Neighbour Quality", "Neighbour Link Quality" and "ETX".

The NQ parameter shows how we see the neighbour from 0 (very bad) to 1 (very good). The NLQ parameter shows how the neighbour sees us from 0 (very bad) to 1 (very good). The ETX is the global transmission quality parameter and goes from 1 to infinite. Good links have ETX values from 1 to 2, regular ones from 2 to 3 and bad ones have values greater than 3. The colours help identifying the link quality

Referensi

• http://wiki.ubnt.com/OLSR_on_OpenWrt

Pranala Menarik

• UBNT
• UBNT: Teknik Recovery
• UBNT: Upload Firmware
• UBNT: Rebuild Firmware
• UBNT: firmware dengan OLSR
• UBNT: openwrt
• UBNT: olsr dengan openwrt
• UBNT: UniFi
• OLSR - di UBNT