Difference between revisions of "UBNT: Upload Firmware"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (New page: Teknik upload firmware sama dengan teknik recovery * Set IP PC 192.168.1.x * Matikan Device UBNT * Tekan tombol Reset * Nyalakan Device UBNT * Lepaskan tombol Reset setelah ~10 detik (tid...) |
Onnowpurbo (talk | contribs) |
||
| Line 13: | Line 13: | ||
tftp> trace | tftp> trace | ||
tftp> put image.bin flash_update | tftp> put image.bin flash_update | ||
| + | |||
| + | ==Pranala Menarik== | ||
| + | |||
| + | * [[UBNT]] | ||
| + | * [[UBNT: Teknik Recovery]] | ||
| + | * [[UBNT: Upload Firmware]] | ||
| + | * [[UBNT: Rebuild Firmware]] | ||
| + | * [[UBNT: openwrt]] | ||
| + | * [[UBNT: olsr dengan openwrt]] | ||
| + | * [[OLSR - di UBNT]] | ||
Revision as of 05:07, 21 July 2012
Teknik upload firmware sama dengan teknik recovery
- Set IP PC 192.168.1.x
- Matikan Device UBNT
- Tekan tombol Reset
- Nyalakan Device UBNT
- Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah.
- Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
- tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update'.
tftp 192.168.1.20 tftp> binary tftp> trace tftp> put image.bin flash_update