Menggunakan openserctl

Aktifkan openser database

# openser_mysql create
MySQL password for root: 
creating database openser ...
Core OpenSER tables succesfully created.
Install presence related tables ?(y/n):y
creating presence tables into openser ...
Presence tables succesfully created.
Install extra tables - imc,cpl,siptrace,domainpolicy ?(y/n):y
creating extra tables into openser ...
Extra tables succesfully created.
Install SERWEB related tables ?(y/n):y
Domain (realm) for the default user 'admin': 192.168.0.2.

creating serweb tables into openser ...
SERWEB tables succesfully created.

Akan keluar warning

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!                                                 !
!                  WARNING                        !
!                                                 !
! There was a default admin user created:         !
!    username: admin@192.168.0.2. 
!    password: openserrw 
!                                                 !
! Please change this password or remove this user !
! from the subscriber and admin_privileges table. !
!                                                 !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Biasanya bisa di ignore saja.

Menyiapkan openserctl

Edit /etc/openser/openserctlrc

# vi /etc/openser/openserctlrc

Pastikan

## your SIP domain
SIP_DOMAIN=openser.org

## database type: MYSQL or PGSQL, by defaulte none is loaded
DBENGINE=MYSQL

## database host
DBHOST=localhost

## database name
DBNAME=openser

## database read/write user
DBRWUSER=openser

## database read only user
DBROUSER=openserro

## password for database read only user
DBROPW=openserro

## database super user
DBROOTUSER="root"

## type of aliases used: DB - database aliases; UL - usrloc aliases
## - default: none
ALIASES_TYPE="DB"

## control engine: FIFO or UNIXSOCK
## - default FIFO
CTLENGINE="FIFO"

## path to FIFO file
## Perhatikan baik-baik path-nya
OSER_FIFO="/tmp/openser_fifo"

## check ACL names; default on (1); off (0)
# VERIFY_ACL=1

## ACL names - if VERIFY_ACL is set, only the ACL names from below list
## are accepted
# ACL_GROUPS="local ld int voicemail free-pstn"

## presence of serweb tables - default "no"
# HAS_SERWEB="yes"

## verbose - debug purposes - default '0'
# VERBOSE=1

## do (1) or don't (0) store plaintext passwords
## in the subscriber table - default '1'
# STORE_PLAINTEXT_PW=0

Menjalankan openserctl

# openserctl 
/usr/sbin/openserctl 1.2 - $Revision: 2135 $
Existing commands:

-- command 'start|stop|restart'
restart ............................ restart OpenSER
start .............................. start OpenSER
stop ............................... stop OpenSER

-- command 'acl' - manage access control lists (acl)
acl show [<username>] .............. show user membership
acl grant <username> <group> ....... grant user membership (*)
acl revoke <username> [<group>] .... grant user membership(s) (*)

-- command 'alias_db' - manage database aliases
alias_db show <alias> .............. show alias details
alias_db list <sip-id> ............. list aliases for uri
alias_db add <alias> <sip-id> ...... add an alias (*)
alias_db rm <alias> ................ remove an alias (*)
alias_db help ...................... help message
   - <alias> must be an AoR (username@domain)"
   - <sip-id> must be an AoR (username@domain)"

-- command 'avp' - manage AVPs
avp list [-T table] [-u <sip-id|uuid>]
    [-a attribute] [-v value] [-t type] ... list AVPs
avp add [-T table] <sip-id|uuid>
    <attribute> <type> <value> ............ add AVP (*)
avp rm [-T table]  [-u <sip-id|uuid>]
    [-a attribute] [-v value] [-t type] ... remove AVP (*)
avp help .................................. help message
   - -T - table name
   - -u - SIP id or unique id
   - -a - AVP name
   - -v - AVP value
   - -t - AVP name and type (0 (str:str), 1 (str:int),
                             2 (int:str), 3 (int:int))
   - <sip-id> must be an AoR (username@domain)
   - <uuid> must be a string but not AoR

-- command 'db' - database operations

db exec <query> ..................... execute SQL query
db roexec <roquery> ................. execute read-only SQL query
db run <id> ......................... execute SQL query from $id variable
db rorun <id> ....................... execute read-only SQL query from $id variable

db show

..................... display table content

---

-- command 'lcr' - manage least cost routes (lcr)
          * lcr *
  * IP addresses must be entered in dotted quad format e.g. 1.2.3.4 *
  * <uri_scheme> and <transport> must be entered in integer or text,*
  * e.g. transport '2' is identical to transport 'tcp'.             *
  *   scheme: 1=sip, 2=sips;   transport: 1=udp, 2=tcp, 3=tls       *
  * Examples:  lcr addgw_grp usa 1                                  *
  *            lcr addgw level3 1.2.3.4 5080 sip tcp 1              *
  *            lcr addroute +1  1 1                               *
lcr show ....................................................................
          ............. show routes, gateways and groups
lcr reload ..................................................................
          ............. reload lcr gateways
lcr addgw_grp <grp_name> ....................................................
          .............. add gateway group, autocreate grp_id
lcr addgw_grp <grp_name> <grp_id> ...........................................
          ............... add gateway group with grp_id
lcr rmgw_grp  <grp_id> ......................................................
          ............... delete the gw_grp
lcr addgw <gw_name> <ip> <port> <scheme> <transport> <grp_id> ...............
          ............... add a gateway
lcr addgw <gw_name> <ip> <port> <scheme> <transport> <grp_id> <prefix> ......
          ............... add a gateway with prefix
lcr addgw <gw_name> <ip> <port> <scheme> <transport> <grp_id> <prefix> <strip>
          ............... add a gateway with prefix and strip
lcr rmgw  <gw_name> .........................................................
          ............... delete a gateway
lcr addroute <prefix> <from> <grp_id> <prio> ................................
          .............. add a route ( use  to match anything in <from> )
lcr rmroute  <prefix> <from> <grp_id> <prio> ................................
          .............. delete a route

-- command 'rpid' - manage Remote-Party-ID (RPID)

rpid add <username> <rpid> ......... add rpid for a user (*)
rpid rm <username> ................. set rpid to NULL for a user (*)
rpid show <username> ............... show rpid of a user

-- command 'speeddial' - manage speed dials (short numbers)
speeddial show <speeddial-id> ....... show speeddial details
speeddial list <sip-id> ............. list speeddial for uri
speeddial add <sip-id> <sd-id> <new-uri> [<desc>] ... 
          ........................... add a speedial (*)
speeddial rm <sip-id> <sd-id> ....... remove a speeddial (*)
speeddial help ...................... help message
   - <speeddial-id>, <sd-id> must be an AoR (username@domain)
   - <sip-id> must be an AoR (username@domain)
   - <new-uri> must be a SIP AoR (sip:username@domain)
   - <desc> a description for speeddial

-- command 'add|mail|passwd|rm' - manage subscribers
add <username> <password> <email> .. add a new subscriber (*)
passwd <username> <passwd> ......... change user's password (*)
rm <username> ...................... delete a user (*)
mail <username> .................... send an email to a user

-- command 'cisco_restart' - restart CISCO phone (NOTIFY)
cisco_restart <uri> ................ restart phone configured for <uri>

-- command 'online' - dump online users from memory
online ............................. display online users

-- command 'monitor' - show internal status
monitor ............................ show server's internal status

-- command 'ping' - ping a SIP URI (OPTIONS)
ping <uri> ......................... ping <uri> with SIP OPTIONS

-- command 'ul|alias' - manage user location or aliases
ul show [<username>]................ show in-RAM online users
ul show --brief..................... show in-RAM online users in short format
ul rm <username> [<contact URI>].... delete user's UsrLoc entries
ul add <username> <uri> ............ introduce a permanent UrLoc entry
ul add <username> <uri> <expires> .. introduce a temporary UrLoc entry

-- command 'fifo'
fifo ............................... send raw FIFO command

Menambah user

# openserctl add 2000 123456 nomail@nomail.com
MySql password for user 'openser@localhost': (default openserrw)
-e new user '2000' added

Pranala Menarik

• OpenSER Softswitch
• Instalasi OpenSER administrator
• Linux Howto
• VoIP