Difference between revisions of "Quagga: BGP Sederhana"

From OnnoWiki
Jump to navigation Jump to search
Line 120: Line 120:
 
ISP1:
 
ISP1:
  
  enable
+
  vtysh
 
  configure terminal
 
  configure terminal
 
   router bgp 10
 
   router bgp 10
Line 137: Line 137:
  
  
  enable
+
  vtysh
 
  configure terminal
 
  configure terminal
 
   router bgp 20
 
   router bgp 20
Line 151: Line 151:
 
ISP3:
 
ISP3:
  
  enable
+
  vtysh
 
  configure terminal
 
  configure terminal
 
   router bgp 30
 
   router bgp 30

Revision as of 05:30, 27 December 2018

Bgp-multihoming.png

Ada tiga (3) ISP

ISP1:

IP 192.168.1.1/24 menuju ISP3
IP 192.168.3.1/24 menuju ISP2
AS 10
IP 10.100.100.0/24
IP 10.100.200.0/24

ISP2

IP 192.168.2.1/24 - menuju ISP3
IP 192.168.3.2/24 - menuju ISP1
AS 20
IP 10.10.10.0/24
IP 10.10.20.0/24

ISP3 (kita)

IP 192.168.1.2/24 - menuju ISP1
IP 192.168.2.2/24 - menuju ISP2
AS 30
IP 10.1.1.0/24
IP 10.1.2.0/24 


Sambungan Fisik

ISP1


ISP1 Eth1/0 -> ISP3 Eth1/0
ISP1 Eth1/1 -> ISP2 Eth1/1
ISP2 Eth1/0 -> ISP3 Eth1/1

ISP1 Eth1/2 10.100.100.1/24
ISP1 Eth1/3 10.100.200.1/24

ISP2 Eth1/2 10.10.10.1/24
ISP2 Eth1/3 10.10.20.1/24

ISP3 Eth1/2 10.1.1.1/24
ISP3 Eth1/3 10.1.2.1/24


Setup connection

ISP1

vtysh
configure terminal
  interface eth0
    ip address 192.168.1.1/24
    no shutdown
    exit
  interface eth1
    ip address 192.168.3.1/24
    no shutdown
    exit
  interface eth2
    ip address 10.100.100.1/24
    no shutdown
    exit
  interface eth3
    ip address 10.100.200.1/24
    no shutdown
    exit
 end

ISP2

vtysh
configure terminal
  interface eth0
    ip address 192.168.2.1/24
    no shutdown
    exit
  interface eth1
    ip address 192.168.3.2/24
    no shutdown
    exit
  interface eth2
    ip address 10.10.10.1/24
    no shutdown
    exit
  interface eth3
    ip address 10.10.20.1/24
    no shutdown
    exit
 end

ISP3

vtysh
configure terminal
  interface eth0
    ip address 192.168.1.2/24
    no shutdown
    exit
  interface eth1
    ip address 192.168.2.2/24
    no shutdown
    exit
  interface eth2
    ip address 10.1.1.1/24
    no shutdown
    exit
  interface eth3
    ip address 10.1.2.1/24
    no shutdown
    exit
 end

BGP Peering

Consider that IP connectivity between ISPs edge routers and Our Core router is already set up and working properly. So we can start to establish BGP peering to both ISPs.


ISP1:

vtysh
configure terminal
  router bgp 10
  bgp router-id 192.168.1.1
    network 10.100.100.0 mask 255.255.255.0
    network 10.100.200.0 mask 255.255.255.0
    neighbor 192.168.3.2 remote-as 20
    neighbor 192.168.1.2 remote-as 30
    neighbor 192.168.3.2 activate 
    neighbor 192.168.1.2 activate 
    ! neighbor 192.168.3.2 default-originate 
    ! neighbor 192.168.1.2 default-originate
  end

ISP2:


vtysh
configure terminal
  router bgp 20
  bgp router-id 192.168.2.1
    network 10.10.10.0 mask 255.255.255.0
    network 10.10.20.0 mask 255.255.255.0
    neighbor 192.168.3.1 remote-as 10
    neighbor 192.168.2.2 remote-as 30
    neighbor 192.168.3.1 activate 
    neighbor 192.168.2.2 activate 
  end

ISP3:

vtysh
configure terminal
  router bgp 30
  bgp router-id 192.168.1.2
    network 10.1.1.0 mask 255.255.255.0
    network 10.1.2.0 mask 255.255.255.0
    neighbor 192.168.1.1 remote-as 10
    neighbor 192.168.2.1 remote-as 20
    neighbor 192.168.1.1 activate
    neighbor 192.168.2.1 activate  
  end

Cek

show ip route
show ip bgp 10.100.1000.0/24
show ip bgp neighbors 192.168.2.2 advertised-routes
show ip bgp neighbor 192.168.1.1 routes
show bgp ipv4 unicast neighbors 
show bgp ipv4 unicast summary

Referensi

Pranala Menarik