Difference between revisions of "IPv6 Route: Display Route IPv6 yang ada"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (New page: 7.1. Displaying existing IPv6 routes First you should check, whether and which IPv6 addresses are already configured (perhaps auto-magically during auto-configuration). 7.1.1. Using "ip" ...) |
Onnowpurbo (talk | contribs) |
||
| Line 6: | Line 6: | ||
Usage: | Usage: | ||
| − | # /sbin/ip -6 route show [dev <device>] | + | # /sbin/ip -6 route show [dev <device>] |
Example: | Example: | ||
| − | # /sbin/ip -6 route show dev eth0 | + | # /sbin/ip -6 route show dev eth0 |
| − | 2001:0db8:0:f101::/64 proto kernel metric 256 mtu 1500 advmss 1440 | + | 2001:0db8:0:f101::/64 proto kernel metric 256 mtu 1500 advmss 1440 |
| − | fe80::/10 proto kernel metric 256 mtu 1500 advmss 1440 | + | fe80::/10 proto kernel metric 256 mtu 1500 advmss 1440 |
| − | ff00::/8 proto kernel metric 256 mtu 1500 advmss 1440 | + | ff00::/8 proto kernel metric 256 mtu 1500 advmss 1440 |
| − | default proto kernel metric 256 mtu 1500 advmss 1440 | + | default proto kernel metric 256 mtu 1500 advmss 1440 |
7.1.2. Using "route" | 7.1.2. Using "route" | ||
| Line 20: | Line 20: | ||
Usage: | Usage: | ||
| − | # /sbin/route -A inet6 | + | # /sbin/route -A inet6 |
Example (output is filtered for interface eth0). Here you see different IPv6 routes for different addresses on a single interface. | Example (output is filtered for interface eth0). Here you see different IPv6 routes for different addresses on a single interface. | ||
| − | # /sbin/route -A inet6 |grep -w "eth0" | + | # /sbin/route -A inet6 |grep -w "eth0" |
| − | 2001:0db8:0:f101 ::/64 :: UA 256 0 0 eth0 <- Interface route for global | + | 2001:0db8:0:f101 ::/64 :: UA 256 0 0 eth0 <- Interface route for global |
| − | ¬ address | + | ¬ address |
| − | fe80::/10 :: UA 256 0 0 eth0 <- Interface route for link-local | + | fe80::/10 :: UA 256 0 0 eth0 <- Interface route for link-local |
| − | ¬ address | + | ¬ address |
| − | ff00::/8 :: UA 256 0 0 eth0 <- Interface route for all multicast | + | ff00::/8 :: UA 256 0 0 eth0 <- Interface route for all multicast |
| − | ¬ addresses | + | ¬ addresses |
| − | ::/0 :: UDA 256 0 0 eth0 <- Automatic default route | + | ::/0 :: UDA 256 0 0 eth0 <- Automatic default route |
Revision as of 07:17, 23 May 2013
7.1. Displaying existing IPv6 routes
First you should check, whether and which IPv6 addresses are already configured (perhaps auto-magically during auto-configuration). 7.1.1. Using "ip"
Usage:
# /sbin/ip -6 route show [dev <device>]
Example:
# /sbin/ip -6 route show dev eth0 2001:0db8:0:f101::/64 proto kernel metric 256 mtu 1500 advmss 1440 fe80::/10 proto kernel metric 256 mtu 1500 advmss 1440 ff00::/8 proto kernel metric 256 mtu 1500 advmss 1440 default proto kernel metric 256 mtu 1500 advmss 1440
7.1.2. Using "route"
Usage:
# /sbin/route -A inet6
Example (output is filtered for interface eth0). Here you see different IPv6 routes for different addresses on a single interface.
# /sbin/route -A inet6 |grep -w "eth0" 2001:0db8:0:f101 ::/64 :: UA 256 0 0 eth0 <- Interface route for global ¬ address fe80::/10 :: UA 256 0 0 eth0 <- Interface route for link-local ¬ address ff00::/8 :: UA 256 0 0 eth0 <- Interface route for all multicast ¬ addresses ::/0 :: UDA 256 0 0 eth0 <- Automatic default route