Difference between revisions of "OpenWRT: Build Firmware"

From OnnoWiki
Jump to navigation Jump to search
Line 25: Line 25:
 
==Menggunakan SVN==
 
==Menggunakan SVN==
  
  svn checkout https://svn.openwrt.org/openwrt/trunk/ ~/openwrt/trunk/
+
Sebagai user biasa lakukan
 +
 
 +
  svn co svn://svn.openwrt.org/openwrt/branches/backfire ~/openwrt/trunk/
 
  cd ~/openwrt/trunk/
 
  cd ~/openwrt/trunk/
 
  ./scripts/feeds update
 
  ./scripts/feeds update

Revision as of 08:07, 22 July 2012

Sumber:


Prosedur

  • Lakukan sebagai non-root user
  • Lakukan semua perintah di <buildroot dir> misalnya ~/openwrt/trunk/
  • Update OpenWrt sources.
  • Update and install package feeds.
  • Configure the build.
  • Start the build. This will automatically compile toolchain, cross-compile sources, package packages, and finally generate an image ready to be flashed.
  • Proceed to Installing OpenWrt


Persiapan

Siapkan aplikasi pendukung

apt-get update
apt-get install subversion

Menggunakan SVN

Sebagai user biasa lakukan

svn co svn://svn.openwrt.org/openwrt/branches/backfire ~/openwrt/trunk/
cd ~/openwrt/trunk/
./scripts/feeds update
./scripts/feeds install <pkg_name_1> <pkg_name_2> ... <pkg_name_N> # After installing the package (creates the symlink for you, you can select it in menuconfig)
make menuconfig # Choose your Target System/Subtarget/Target Profile and select packages/features
make world

Update SVN

cd ~/trunk/
svn update
./scripts/feeds update

Menggunakan GIT

git clone git://nbd.name/openwrt.git ~/openwrt/trunk/
cd ~/openwrt/trunk/
./scripts/feeds update # You have to change feeds.conf to use the git packages repo. See the patch below.
./scripts/feeds install <pkg_name_1> <pkg_name_2> ... <pkg_name_N> # After installing the package (creates the symlink for you, you can select it in menuconfig)
make menuconfig # Choose your Target System/Subtarget/Target Profile and select packages/features
make world

Update GIT

cd ~/trunk/
git pull
./scripts/feeds update

Tips

You should specify which chipset you are using. But on your target/linux/chipname/, there should be a makefile that tells you which build you are supposed to build.

For my case it was in kamikaze/target/linux/atheros/Makefile.

LINUX_VERSION:=2.6.23.17 <-- just change this to whatever is your rev is you probably need to know the subversion.



Referensi

Pranala Menarik