Difference between revisions of "UBNT: Teknik Recovery"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 3: | Line 3: | ||
* Set IP PC 192.168.1.x | * Set IP PC 192.168.1.x | ||
| + | * Turn off the device | ||
| + | * Press the reset button | ||
| + | * Turn on the device | ||
| + | * Release the reset button ~10 seconds (but not longer) after turning the device on. You will know it's ready when the LEDs change. | ||
| + | * Ping 192.168.1.20. If it works, you're ready to upload an image, if not, go back to step 1. | ||
| + | * tftp the image in binary mode to 192.168.1.20 as 'flash_update'. | ||
| + | |||
* Tekan Tombol Reset UBNT | * Tekan Tombol Reset UBNT | ||
* ping | * ping | ||
Revision as of 20:13, 20 July 2012
Kalau salah flash firmware langkah yang perlu dilakukan
- Set IP PC 192.168.1.x
- Turn off the device
- Press the reset button
- Turn on the device
- Release the reset button ~10 seconds (but not longer) after turning the device on. You will know it's ready when the LEDs change.
- Ping 192.168.1.20. If it works, you're ready to upload an image, if not, go back to step 1.
- tftp the image in binary mode to 192.168.1.20 as 'flash_update'.
- Tekan Tombol Reset UBNT
- ping
ping 192.168.1.20
- jika dapat responds dari ping
- lakukan tftp
tftp 192.168.1.20 tftp> binary tftp> trace tftp> put image.bin flash_update