Difference between revisions of "Instalasi EasyIDS"

Revision as of 23:29, 6 July 2010

Konfigurasi Jaringan

PC harus memiliki 2 Ethernet. eth0 harus tersambung ke jaringan dengan DHCP Server. eth1 harus tersambung ke jaringan antara firewall dan Internet.

Instalasi ISO

Gunakan PC dengan 2 Ethernet, 384MB+ RAM, 8GB+ Harddisk. Tekan enter, pilih keyword layout & timezone, masukan root password 2 kali.

Penggunaan EasyIDS

EasyIDS di akses melalui Web

https://ip-address (admin password)
https://192.168.0.70/ntop/
https://ip-address/base/base_main.php
https://ip-address/arpwatch.php

Untuk akses SSH

username root
password passwordyangandamasukanwaktuinstalasi

Referensi

http://www.skynet-solutions.net/easyids/quickinstall.asp

Pranala Menarik

@@ Line 1: / Line 1: @@
-Configuring the network:
+==Konfigurasi Jaringan==
-One NIC (eth0) should be plugged into a DHCP enabled switch and the other (eth1) should be plugged into either a mirrored port on your switch or into a dumb hub placed between your firewall and the internet. If you don't know which NIC is eth0 then plug both NICs into your DHCP enabled switch. After install you will be shown upon login the IP address that you will browse to from another computer. Unplug NICs one at a time until you can't access the web interface and that will be eth0.
-Installing the ISO:
+PC harus memiliki 2 Ethernet.
-Boot to the install cd on a computer compatible with Centos Linux that has 2 network interface cards (NICs), 384MB+ of RAM, and a 8GB+ hard drive. Press Enter at the boot prompt, select your keyboard layout & timezone, and enter your root password twice. This is the password you will use when logging into the Linux command line. The system will eject the cd which you'll need to take out of the drive and after two reboots your system will be ready for use.
+eth0 harus tersambung ke jaringan dengan DHCP Server.
+eth1 harus tersambung ke jaringan antara firewall dan Internet.
-Using the system:
+==Instalasi ISO==
-Log into your EasyIDS system with the username root and the password you entered during installation. When you login the system will show you what IP address it got from the DHCP server. To access the EasyIDS GUI browse to https://IPADDRESS from another computer and login with the username admin and the password password.
+Gunakan PC dengan 2 Ethernet, 384MB+ RAM, 8GB+ Harddisk.
+Tekan enter, pilih keyword layout & timezone, masukan root password 2 kali.
-==Akses EasyIDS==
+==Penggunaan EasyIDS==
+EasyIDS di akses melalui Web
   https://ip-address (admin password)
@@ Line 15: / Line 18: @@
   https://ip-address/base/base_main.php
   https://ip-address/arpwatch.php
+Untuk akses SSH
+ username root
+ password passwordyangandamasukanwaktuinstalasi
 ==Referensi==