Difference between revisions of "OpenAirInterface: Konfigurasi enb.conf"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
|||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | Konfigurasi Radio Access Network (RAN) Open Air Interface dapat dilakukan dengan mengedit file konfigurasi untuk band yang ingin kita gunakan sebagai berikut, | ||
| + | |||
cd /usr/local/src/openairinterface5g/ci-scripts/conf_files/ | cd /usr/local/src/openairinterface5g/ci-scripts/conf_files/ | ||
nano enb.band7.tm1.25PRB.usrpb210.conf | nano enb.band7.tm1.25PRB.usrpb210.conf | ||
| + | |||
| + | Di atas kita mengedit file konfigurasi enb untuk beroperasi pada band7. | ||
| + | Isi konfigurasi di sesuaikan dengan kondisi jarigan yang kita gunakan, kira-kira sebagai berikut, | ||
tracking_area_code = 1; | tracking_area_code = 1; | ||
plmn_list = ( { mcc = 510; mnc = 33; mnc_length = 2; } ); | plmn_list = ( { mcc = 510; mnc = 33; mnc_length = 2; } ); | ||
| − | + | mme_ip_address = ( { ipv4 = "192.168.100.236"; | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
ipv6 = "192:168:30::17"; | ipv6 = "192:168:30::17"; | ||
port = 36412 ; | port = 36412 ; | ||
| Line 30: | Line 26: | ||
ENB_PORT_FOR_X2C = 36422; # Spec 36422 | ENB_PORT_FOR_X2C = 36422; # Spec 36422 | ||
}; | }; | ||
| + | |||
| + | Jika kita menggunakan band3, maka konfigurasi enb untuk Band3 kira-kira sebagai berikut, | ||
| + | |||
| + | component_carriers = ( | ||
| + | { | ||
| + | eutra_band = 3; | ||
| + | downlink_frequency = 1870000000L; | ||
| + | uplink_frequency_offset = -95000000; | ||
| + | } | ||
| + | ); | ||
| + | |||
| + | Jika kita menggunakan band7, maka konfigurasi enb untuk Band7 kira-kira sebagai berikut, | ||
| + | |||
| + | component_carriers = ( | ||
| + | { | ||
| + | eutra_band = 7; | ||
| + | downlink_frequency = 2680000000L; | ||
| + | uplink_frequency_offset = -120000000; | ||
| + | } | ||
| + | ); | ||
| + | |||
| + | |||
| + | ==Pranala Menarik== | ||
| + | |||
| + | * [[5G]] | ||
Latest revision as of 13:56, 25 December 2022
Konfigurasi Radio Access Network (RAN) Open Air Interface dapat dilakukan dengan mengedit file konfigurasi untuk band yang ingin kita gunakan sebagai berikut,
cd /usr/local/src/openairinterface5g/ci-scripts/conf_files/ nano enb.band7.tm1.25PRB.usrpb210.conf
Di atas kita mengedit file konfigurasi enb untuk beroperasi pada band7. Isi konfigurasi di sesuaikan dengan kondisi jarigan yang kita gunakan, kira-kira sebagai berikut,
tracking_area_code = 1;
plmn_list = ( { mcc = 510; mnc = 33; mnc_length = 2; } );
mme_ip_address = ( { ipv4 = "192.168.100.236";
ipv6 = "192:168:30::17";
port = 36412 ;
active = "yes";
preference = "ipv4";
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "enp1s0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.100.234/24";
ENB_INTERFACE_NAME_FOR_S1U = "enp1s0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.100.234/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.100.234/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
Jika kita menggunakan band3, maka konfigurasi enb untuk Band3 kira-kira sebagai berikut,
component_carriers = (
{
eutra_band = 3;
downlink_frequency = 1870000000L;
uplink_frequency_offset = -95000000;
}
);
Jika kita menggunakan band7, maka konfigurasi enb untuk Band7 kira-kira sebagai berikut,
component_carriers = (
{
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
}
);