Difference between revisions of "ADS-B: Instalasi gr-air-modes"

Latest revision as of 17:54, 2 January 2020

gr-air-modes untuk bisa monitor transmisi ADS-B membutuhkan

UHD
GNURadio
RTL-SDR
gr_osmoSDR

Lakukan sampai selesai proses

GNURadio: Compile GNURadio + UHD

Instalasi gr-air-modes

Install

apt install pyqt4-dev-tools

Lakukan

cd /usr/local/src/SDR
git clone https://github.com/bistromath/gr-air-modes.git
cd /usr/local/src/SDR/gr-air-modes/
mkdir build
cd build
cmake ..
make
sudo make install
sudo ldconfig

Jalankan gr-air-modes

Jalankan menggunakan perintah

modes_rx -d -P

Keluar

gr-air-modes warning: numpy+scipy not installed, FlightGear interface not supported
gr-osmosdr supported device types: file fcd rtl rtl_tcp 
Using device #0: ezcap USB 2.0 DVB-T/DAB/FM dongle
Found Elonics E4000 tuner
Gain is 34
Rate is 4000000
Using Volk machine: ssse3_32
>>> gr_fir_ccf: using SSE
(-52 0.0000000000) Type 17 BDS0,9-1 (track report) from 8a0261 with velocity 270kt heading 103 VS 2304
(-52 0.0000000000) Type 11 (all call reply) from 8a0261 in reply to interrogator 0 with capability level 6
(-52 0.0000000000) Type 17 BDS0,9-1 (track report) from 8a0261 with velocity 270kt heading 103 VS 2304
(-52 0.0000000000) Type 11 (all call reply) from 8a0261 in reply to interrogator 0 with capability level 6

Catatan Antenna

with a piece of wire in the rtl283 antenna socket resulted in decodes from one aircraft almost overhead. Time for a better 1090MHz antenna. The J pole previously used was easy to build from 2 pieces of semi rigid cable so time to make another.It was tuned with a tracking generator/directional coupler/ spectrum analyser and achieved 32dB retun loss after tweaking. Putting this on the end of 35' of cable in the loft resulted in many more decodes and a torrent of data in the terminal:-

Membuat Virtual Radar

Next time to plot the data. The article pointed to Virtual radar server at http://www.virtualradarserver.co.uk/Mono.aspx so this was installed. Launching it with and clicking on the http link for local host resulted in the following map with 8 aircraft:-

The rtl2832 is not as sensitive as the Modesbeast I also have but it is only 5% of the cost!

@@ Line 1: / Line 1: @@
-==Persiapan==
+gr-air-modes untuk bisa monitor transmisi ADS-B membutuhkan
+* UHD
+* GNURadio
+* RTL-SDR
+* gr_osmoSDR
+Lakukan sampai selesai proses
-Instalasi paket pendukung
+* [[GNURadio: Compile GNURadio + UHD]]
- sudo apt-get install cmake swig libcppunit-dev python-cheetah doxygen \
- libboost-all-dev python-sphinx libfftw3-dev python-numpy libqwt-dev \
- libusb-dev libusb-dev libusb-1.0-0-dev libgsl-dev python-wxgtk3.0 git qtcreator \
- bison flex
-Upgrade CMAKE
- sudo du
+==Instalasi gr-air-modes==
- apt remove --purge cmake
- cd /opt/
- wget https://github.com/Kitware/CMake/releases/download/v3.16.2/cmake-3.16.2-Linux-x86_64.sh
- chmod +x /opt/cmake-3.16.2-Linux-x86_64.sh
- sudo bash /opt/cmake-3.16.2-Linux-x86_64.sh
- sudo ln -s /opt/cmake-3.16.2-Linux-x86_64/bin/* /usr/local/bin
- sudo ln -s /opt/cmake-3.16.2-Linux-x86_64/bin/* /usr/bin
- cmake --version
-Buat directory
- mkdir -y /usr/local/src/SDR
- cd /usr/local/src/SDR
-==Install UHD + GNURadio==
-Compile SWIG
- sudo su
- sudo apt-get install bison flex
- cd /usr/local/src
- git clone https://github.com/swig/swig.git
- cd swig
- sudo apt-get install automake
- ./autogen.sh
- ./configure
- make
- make install
-Compile UHD
- mkdir -p /usr/local/src/SDR
- cd /usr/local/src/SDR
- git clone https://github.com/EttusResearch/uhd
- cd /usr/local/src/SDR/uhd/
- git tag -l
- git checkout v3.15.0.0
- cd host
- mkdir build
- cd build
- cmake ../
- make
- make test
- sudo make install
- sudo ldconfig
- export LD_LIBRARY_PATH=/usr/local/lib
-Compile GNURadio
- cd /usr/local/src/SDR
- git clone --recursive https://github.com/gnuradio/gnuradio.git
- cd gnuradio
- git checkout maint-3.8
- git submodule update --init --recursive
- mkdir build
- cd build
- cmake -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=/usr/bin/python3 ../
- make
- make test
- sudo make install
- sudo ldconfig
-==Install rtl_sdr==
-Lakukan
- cd /usr/local/src/SDR
- git clone git://git.osmocom.org/rtl-sdr.git
- cd /usr/local/src/SDR/rtl-sdr/
- mkdir build
- cd build
- cmake ../
- make
- sudo make install
- sudo ldconfig
-Aturan udev yang penting agar USB dongle terdetek dengan baik perlu di copy menggunakan perintah berikut
- cd /usr/local/src/SDR/rtl-sdr/
- sudo cp rtl-sdr.rules /etc/udev/rules.d/40-basic-permissions.rules
- /etc/init.d/udev restart
-Kita dapat meng-unplug & replug USB dongle.
-Cek menggunakan perintah
- lsusb
-Keluar
- Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
- Bus 006 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc.
- Bus 001 Device 003: ID 0bda:2838 Realtek Semiconductor Corp.
-==Install gr_osmoSDR==
-Masuk ke directory
- cd /usr/local/src/SDR/
- git clone git://git.osmocom.org/gr-osmosdr
- cd /usr/local/src/SDR/gr-osmosdr/
+Install
- git checkout gr3.8
- mkdir build
- cd build/
- cmake ../
- make
- sudo make install
- sudo ldconfig
-==Instalasi gr-air-modes==
+ apt install pyqt4-dev-tools
 Lakukan
@@ Line 130: / Line 21: @@
   cd /usr/local/src/SDR
   git clone https://github.com/bistromath/gr-air-modes.git
   cd /usr/local/src/SDR/gr-air-modes/
   mkdir build

Difference between revisions of "ADS-B: Instalasi gr-air-modes"

Latest revision as of 17:54, 2 January 2020

Contents

Instalasi gr-air-modes

Jalankan gr-air-modes

Catatan Antenna

Membuat Virtual Radar

Referensi

Pranala Menarik

Navigation menu

Search