Difference between revisions of "Arduino: LCD keypad shield"

From OnnoWiki
Jump to navigation Jump to search
(Created page with "center|200px|thumb")
 
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[[File:LCD Keybrd1-700x700.jpg|center|200px|thumb]]
+
[[File:LCD Keybrd1-700x700.jpg|center|400px|thumb]]
 +
 
 +
[[File:FKUA4JDITKJE7UI.LARGE.jpg|center|400px|thumb]]
 +
 
 +
 
 +
==Library==
 +
 
 +
* https://github.com/arduino-libraries/LiquidCrystal
 +
 
 +
Lakukan
 +
 
 +
mv LiquidCrystal-master.zip ~/Arduino/libraries/
 +
 
 +
Kemudian Load Library
 +
 
 +
==Test Program==
 +
 
 +
//Sample using LiquidCrystal library
 +
#include <LiquidCrystal.h>
 +
 +
/*******************************************************
 +
 +
This program will test the LCD panel and the buttons
 +
Mark Bramwell, July 2010
 +
 +
********************************************************/
 +
 +
// select the pins used on the LCD panel
 +
LiquidCrystal lcd(8, 9, 4, 5, 6, 7);
 +
 +
// define some values used by the panel and buttons
 +
int lcd_key    = 0;
 +
int adc_key_in  = 0;
 +
#define btnRIGHT  0
 +
#define btnUP    1
 +
#define btnDOWN  2
 +
#define btnLEFT  3
 +
#define btnSELECT 4
 +
#define btnNONE  5
 +
 +
// read the buttons
 +
int read_LCD_buttons()
 +
{
 +
  adc_key_in = analogRead(0);      // read the value from the sensor
 +
  // my buttons when read are centered at these valies: 0, 144, 329, 504, 741
 +
  // we add approx 50 to those values and check to see if we are close
 +
  if (adc_key_in > 1000) return btnNONE; // We make this the 1st option for speed reasons since it will be the most likely result
 +
  // For V1.1 us this threshold
 +
  // if (adc_key_in < 50)  return btnRIGHT; 
 +
  // if (adc_key_in < 250)  return btnUP;
 +
  // if (adc_key_in < 450)  return btnDOWN;
 +
  // if (adc_key_in < 650)  return btnLEFT;
 +
  // if (adc_key_in < 850)  return btnSELECT; 
 +
 +
  // For V1.0 comment the other threshold and use the one below:
 +
  if (adc_key_in < 50)  return btnRIGHT; 
 +
  if (adc_key_in < 195)  return btnUP;
 +
  if (adc_key_in < 380)  return btnDOWN;
 +
  if (adc_key_in < 555)  return btnLEFT;
 +
  if (adc_key_in < 790)  return btnSELECT; 
 +
 +
  return btnNONE;  // when all others fail, return this...
 +
}
 +
 +
void setup()
 +
{
 +
  lcd.begin(16, 2);              // start the library
 +
  lcd.setCursor(0,0);
 +
  lcd.print("Push the buttons"); // print a simple message
 +
}
 +
 
 +
void loop()
 +
{
 +
  lcd.setCursor(9,1);            // move cursor to second line "1" and 9 spaces over
 +
  lcd.print(millis()/1000);      // display seconds elapsed since power-up
 +
 
 +
 +
  lcd.setCursor(0,1);            // move to the begining of the second line
 +
  lcd_key = read_LCD_buttons();  // read the buttons
 +
 +
  switch (lcd_key)              // depending on which button was pushed, we perform an action
 +
  {
 +
    case btnRIGHT:
 +
      {
 +
      lcd.print("RIGHT ");
 +
      break;
 +
      }
 +
    case btnLEFT:
 +
      {
 +
      lcd.print("LEFT  ");
 +
      break;
 +
      }
 +
    case btnUP:
 +
      {
 +
      lcd.print("UP    ");
 +
      break;
 +
      }
 +
    case btnDOWN:
 +
      {
 +
      lcd.print("DOWN  ");
 +
      break;
 +
      }
 +
    case btnSELECT:
 +
      {
 +
      lcd.print("SELECT");
 +
      break;
 +
      }
 +
      case btnNONE:
 +
      {
 +
      lcd.print("NONE  ");
 +
      break;
 +
      }
 +
  }
 +
}
 +
 
 +
==Referensi==
 +
 
 +
* https://github.com/andygock/DFR_LCD_Keypad/archive/master.zip
 +
* https://www.dfrobot.com/wiki/index.php/Arduino_LCD_KeyPad_Shield_(SKU:_DFR0009)
 +
 
 +
==Pranala Menarik==

Latest revision as of 20:35, 1 April 2023

LCD Keybrd1-700x700.jpg
FKUA4JDITKJE7UI.LARGE.jpg


Library

Lakukan 

mv LiquidCrystal-master.zip ~/Arduino/libraries/

Kemudian Load Library

Test Program

//Sample using LiquidCrystal library
#include <LiquidCrystal.h>

/*******************************************************

This program will test the LCD panel and the buttons
Mark Bramwell, July 2010

********************************************************/

// select the pins used on the LCD panel
LiquidCrystal lcd(8, 9, 4, 5, 6, 7);

// define some values used by the panel and buttons
int lcd_key     = 0;
int adc_key_in  = 0;
#define btnRIGHT  0
#define btnUP     1
#define btnDOWN   2
#define btnLEFT   3
#define btnSELECT 4
#define btnNONE   5

// read the buttons
int read_LCD_buttons()
{
 adc_key_in = analogRead(0);      // read the value from the sensor 
 // my buttons when read are centered at these valies: 0, 144, 329, 504, 741
 // we add approx 50 to those values and check to see if we are close
 if (adc_key_in > 1000) return btnNONE; // We make this the 1st option for speed reasons since it will be the most likely result
 // For V1.1 us this threshold
 // if (adc_key_in < 50)   return btnRIGHT;  
 // if (adc_key_in < 250)  return btnUP; 
 // if (adc_key_in < 450)  return btnDOWN; 
 // if (adc_key_in < 650)  return btnLEFT; 
 // if (adc_key_in < 850)  return btnSELECT;   

 // For V1.0 comment the other threshold and use the one below:
 if (adc_key_in < 50)   return btnRIGHT;  
 if (adc_key_in < 195)  return btnUP; 
 if (adc_key_in < 380)  return btnDOWN; 
 if (adc_key_in < 555)  return btnLEFT; 
 if (adc_key_in < 790)  return btnSELECT;   

 return btnNONE;  // when all others fail, return this...
}

void setup()
{
 lcd.begin(16, 2);              // start the library
 lcd.setCursor(0,0);
 lcd.print("Push the buttons"); // print a simple message
}
 
void loop()
{
 lcd.setCursor(9,1);            // move cursor to second line "1" and 9 spaces over
 lcd.print(millis()/1000);      // display seconds elapsed since power-up 
 

 lcd.setCursor(0,1);            // move to the begining of the second line
 lcd_key = read_LCD_buttons();  // read the buttons 

 switch (lcd_key)               // depending on which button was pushed, we perform an action
 {
   case btnRIGHT:
     {
     lcd.print("RIGHT ");
     break;
     }
   case btnLEFT:
     {
     lcd.print("LEFT   ");
     break;
     }
   case btnUP:
     {
     lcd.print("UP    ");
     break;
     }
   case btnDOWN:
     {
     lcd.print("DOWN  ");
     break;
     }
   case btnSELECT:
     {
     lcd.print("SELECT");
     break;
     }
     case btnNONE:
     {
     lcd.print("NONE  ");
     break;
     }
 }
}

Referensi

Pranala Menarik

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=Arduino:_LCD_keypad_shield&oldid=68273"