Difference between revisions of "SNMP: Instalasi & Konfigurasi di Ubuntu"

From OnnoWiki
Jump to navigation Jump to search
(New page: Sumber: http://www.it-slav.net/blogs/2009/02/05/install-and-configure-snmp-on-ubuntu/ This guide describe howto install and configure SNMP on Ubuntu. In an earlier article I have descri...)
 
 
(3 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
  
−
This guide describe howto install and configure SNMP on Ubuntu.
+
Cara menginstalasi & konfigurasi SNMP di Ubuntu.
−
 
 
−
In an earlier article I have described howto set it up on RHES or CentOS, it is slightly different in Ubuntu.
 
−
 
 
−
 
−
 
 
 
   
 
   
−
1.Installation
 
  
−
root@ibsen:~# sudo apt-get install snmpd
+
==Installation==
−
Reading package lists... Done
 
−
Building dependency tree     
 
−
Reading state information... Done
 
−
The following packages were automatically installed and are no longer required:
 
−
  libmpich1.0gf libdc1394-22 genisoimage linux-headers-2.6.27-7 libgfortran2 dvd+rw-tools linux-headers-2.6.27-7-generic libcarp-clan-perl libxml-xql-perl libparse-yapp-perl
 
−
  rdate python-xml localechooser-data gcc-4.2-base libimage-size-perl libdebconfclient0 libvisual-0.4-0 libmyth-python perlmagick libvisual-0.4-plugins libavdevice52
 
−
Use 'apt-get autoremove' to remove them.
 
−
The following extra packages will be installed:
 
−
  libperl5.10 libsensors3 libsnmp-base libsnmp15
 
−
Suggested packages:
 
−
  lm-sensors
 
−
The following NEW packages will be installed:
 
−
  libperl5.10 libsensors3 libsnmp-base libsnmp15 snmpd
 
−
0 upgraded, 5 newly installed, 0 to remove and 3 not upgraded.
 
−
Need to get 2463kB of archives.
 
−
After this operation, 7987kB of additional disk space will be used.
 
−
Do you want to continue [Y/n]?
 
  
−
answer y
+
apt-get install snmpd
  
 
   
 
   
−
2. Configuration
+
==Configuration==
  
−
Move existing /etc/snmp/snmpd.conf configuration file to /etc/snmp/snmpd.conf.org
+
Backup /etc/snmp/snmpd.conf
  
−
mv /etc/snmp/snmpd.conf  /etc/snmp/snmpd.conf.org
+
mv /etc/snmp/snmpd.conf  /etc/snmp/snmpd.conf.org
  
−
Create a new /etc/snmp/snmpd.conf file:
+
Buat file baru /etc/snmp/snmpd.conf:
  
−
rocommunity  public
+
rocommunity  public
−
syslocation  "PDC, Peters DataCenter"
+
syslocation  "PDC, Peters DataCenter"
−
syscontact  peter@it-slav.net
+
syscontact  peter@it-slav.net
  
−
Make snmpd use the newly created file and make it listen to all interfaces:
+
Pastikan snmpd menggunakan file ini untuk mendengarkan semua interface:
  
−
Edit /etc/default/snmpd
+
==Edit /etc/default/snmpd==
  
−
Change from:
+
Ubah dari:
  
−
# snmpd options (use syslog, close stdin/out/err).
+
# snmpd options (use syslog, close stdin/out/err).
−
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1'
+
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1'
  
−
To:
+
Ke:
  
−
# snmpd options (use syslog, close stdin/out/err).
+
# snmpd options (use syslog, close stdin/out/err).
−
#SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1'
+
#SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1'
−
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid -c /etc/snmp/snmpd.conf'
+
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid -c /etc/snmp/snmpd.conf'
  
−
and restart snmpd
+
restart
  
−
/etc/init.d/snmpd restart
+
/etc/init.d/snmpd restart
  
 
   
 
   
 +
==Test==
  
−
+
Lakukan snmpwalk dari mesin lain,
−
3. Test
 
  
−
Do a snmpwalk from another host against your newly configured host.
+
[root@op5 ~]# snmpwalk -v 1 -c public -O e ibsen
  
−
[root@op5 ~]# snmpwalk -v 1 -c public -O e ibsen
+
SNMPv2-MIB::sysDescr.0 = STRING: Linux ibsen 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686
−
SNMPv2-MIB::sysDescr.0 = STRING: Linux ibsen 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686
+
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
−
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
+
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (68869) 0:11:28.69
−
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (68869) 0:11:28.69
+
SNMPv2-MIB::sysContact.0 = STRING: peter@it-slav.net
−
SNMPv2-MIB::sysContact.0 = STRING: peter@it-slav.net
+
SNMPv2-MIB::sysName.0 = STRING: ibsen
−
SNMPv2-MIB::sysName.0 = STRING: ibsen
+
SNMPv2-MIB::sysLocation.0 = STRING: "PDC, Peters DataCenter"
−
SNMPv2-MIB::sysLocation.0 = STRING: "PDC, Peters DataCenter"
+
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01
−
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01
+
SNMPv2-MIB::sysORID.1 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
−
SNMPv2-MIB::sysORID.1 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
+
SNMPv2-MIB::sysORID.2 = OID: SNMP-MPD-MIB::snmpMPDCompliance
−
SNMPv2-MIB::sysORID.2 = OID: SNMP-MPD-MIB::snmpMPDCompliance
+
SNMPv2-MIB::sysORID.3 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
−
SNMPv2-MIB::sysORID.3 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
+
SNMPv2-MIB::sysORID.4 = OID: SNMPv2-MIB::snmpMIB
−
SNMPv2-MIB::sysORID.4 = OID: SNMPv2-MIB::snmpMIB
+
SNMPv2-MIB::sysORID.5 = OID: TCP-MIB::tcpMIB
−
SNMPv2-MIB::sysORID.5 = OID: TCP-MIB::tcpMIB
+
SNMPv2-MIB::sysORID.6 = OID: IP-MIB::ip
−
SNMPv2-MIB::sysORID.6 = OID: IP-MIB::ip
 
  
 
Yes it works!!
 
Yes it works!!
  
 
   
 
   
−
4. Monitor example
+
==Contoh Monitor==
  
 
Below is an example of how it looks using op5 Monitor a Nagios based Enterprise Monitor solution.
 
Below is an example of how it looks using op5 Monitor a Nagios based Enterprise Monitor solution.
Line 99: Line 75:
 
5. Useful links
 
5. Useful links
  
−
    op5 Statistics, a cacti based graph tool
+
op5 Statistics, a cacti based graph tool
−
    op5 Monitor, an Enterprise Class Monitoring system based on Nagios
+
op5 Monitor, an Enterprise Class Monitoring system based on Nagios
−
    Net-SNMP, an open source implementation of SNMP
+
Net-SNMP, an open source implementation of SNMP
−
    Cacti, an open source graph tool
+
Cacti, an open source graph tool
−
    Nagios, the number 1 monitor tool
+
Nagios, the number 1 monitor tool
  
  
Line 111: Line 87:
  
 
* http://www.it-slav.net/blogs/2009/02/05/install-and-configure-snmp-on-ubuntu/
 
* http://www.it-slav.net/blogs/2009/02/05/install-and-configure-snmp-on-ubuntu/
 +
 +
 +
==Pranala Menarik==
 +
 +
* [[SNMP]]

Latest revision as of 12:14, 12 May 2020

Sumber: http://www.it-slav.net/blogs/2009/02/05/install-and-configure-snmp-on-ubuntu/


Cara menginstalasi & konfigurasi SNMP di Ubuntu.


Installation

apt-get install snmpd


Configuration

Backup /etc/snmp/snmpd.conf 

mv /etc/snmp/snmpd.conf  /etc/snmp/snmpd.conf.org

Buat file baru /etc/snmp/snmpd.conf: 

rocommunity  public
syslocation  "PDC, Peters DataCenter"
syscontact  peter@it-slav.net

Pastikan snmpd menggunakan file ini untuk mendengarkan semua interface:

Edit /etc/default/snmpd

Ubah dari: 

# snmpd options (use syslog, close stdin/out/err).
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1'

Ke: 

# snmpd options (use syslog, close stdin/out/err).
#SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1'
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid -c /etc/snmp/snmpd.conf'

restart 

/etc/init.d/snmpd restart


Test

Lakukan snmpwalk dari mesin lain, 

[root@op5 ~]# snmpwalk -v 1 -c public -O e ibsen

SNMPv2-MIB::sysDescr.0 = STRING: Linux ibsen 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (68869) 0:11:28.69
SNMPv2-MIB::sysContact.0 = STRING: peter@it-slav.net
SNMPv2-MIB::sysName.0 = STRING: ibsen
SNMPv2-MIB::sysLocation.0 = STRING: "PDC, Peters DataCenter"
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORID.1 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.2 = OID: SNMP-MPD-MIB::snmpMPDCompliance
SNMPv2-MIB::sysORID.3 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORID.4 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.5 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.6 = OID: IP-MIB::ip

Yes it works!!


Contoh Monitor

Below is an example of how it looks using op5 Monitor a Nagios based Enterprise Monitor solution.

Optimussnmp-eth0.png


5. Useful links 

op5 Statistics, a cacti based graph tool
op5 Monitor, an Enterprise Class Monitoring system based on Nagios
Net-SNMP, an open source implementation of SNMP
Cacti, an open source graph tool
Nagios, the number 1 monitor tool



Referensi


Pranala Menarik

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=SNMP:_Instalasi_%26_Konfigurasi_di_Ubuntu&oldid=61530"