Difference between revisions of "ADS-B: Instalasi gr-air-modes"

From OnnoWiki
Jump to navigation Jump to search
(New page: The next task for the RTL2832 was to decode aircraft transmitting A-DSB using Ubuntu. Doug G4DZU had previously pointed me at a link http://www.hamradioscience.com/the-rtl-2832u-sdr-and-a...)
 
 
(45 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
The next task for the RTL2832 was  to decode aircraft transmitting A-DSB using Ubuntu. Doug G4DZU had previously pointed me at a link http://www.hamradioscience.com/the-rtl-2832u-sdr-and-ads-b/ with an idiots guide to doing it , so it was time to try
+
gr-air-modes untuk bisa monitor transmisi ADS-B membutuhkan
−
.
+
* UHD
−
Installing gnuradio took one line (and patience):-
+
* GNURadio
 +
* RTL-SDR
 +
* gr_osmoSDR
  
−
wget http://www.sbrac.org/files/build-gnuradio && chmod a+x ./build-gnuradio && ./build-gnuradio
+
Lakukan sampai selesai proses
  
−
dinner and desert  and a coffee later it finished. Time to see if it worked:-
+
* [[GNURadio: Compile GNURadio + UHD]]
  
−
rtl_test -t
 
−
Found 1 device(s):
 
−
  0:  Generic RTL2832U (e.g. hama nano)
 
−
Using device 0: Generic RTL2832U (e.g. hama nano)
 
−
Found Elonics E4000 tuner
 
−
Supported gain values (14): -1.0 1.5 4.0 6.5 9.0 11.5 14.0 16.5 19.0 21.5 24.0 29.0 34.0 42.0
 
−
Benchmarking E4000 PLL...
 
−
[E4K] PLL not locked for 52000000 Hz!
 
−
[E4K] PLL not locked for 2217000000 Hz!
 
−
[E4K] PLL not locked for 1109000000 Hz!
 
−
[E4K] PLL not locked for 1249000000 Hz!
 
−
E4K range: 53 to 2216 MHz
 
−
E4K L-band gap: 1109 to 1249 MHz
 
  
−
looks like mine works 53-1108MHz & 1250-2216MHz, Impressive!
 
  
−
next install gr-air-modes:-
+
==Instalasi gr-air-modes==
  
 +
Install
  
−
git clone https://github.com/bistromath/gr-air-modes.git
+
apt install pyqt4-dev-tools
  
 +
Lakukan
  
−
cd gr-air-modes/
+
cd /usr/local/src/SDR
−
mkdir build
+
git clone https://github.com/bistromath/gr-air-modes.git
−
cd build
+
cd /usr/local/src/SDR/gr-air-modes/
−
cmake ..
+
mkdir build
−
make
+
cd build
−
sudo make install
+
cmake ..
−
sudo ldconfig
+
make
 +
sudo make install
 +
sudo ldconfig
  
−
Launching the programme with
+
==Jalankan gr-air-modes==
  
 +
Jalankan menggunakan perintah
  
−
uhd_modes.py -d -P  
+
modes_rx -d -P
 +
 
 +
Keluar
 +
 
 +
gr-air-modes warning: numpy+scipy not installed, FlightGear interface not supported
 +
gr-osmosdr supported device types: file fcd rtl rtl_tcp
 +
Using device #0: ezcap USB 2.0 DVB-T/DAB/FM dongle
 +
Found Elonics E4000 tuner
 +
Gain is 34
 +
Rate is 4000000
 +
Using Volk machine: ssse3_32
 +
>>> gr_fir_ccf: using SSE
 +
(-52 0.0000000000) Type 17 BDS0,9-1 (track report) from 8a0261 with velocity 270kt heading 103 VS 2304
 +
(-52 0.0000000000) Type 11 (all call reply) from 8a0261 in reply to interrogator 0 with capability level 6
 +
(-52 0.0000000000) Type 17 BDS0,9-1 (track report) from 8a0261 with velocity 270kt heading 103 VS 2304
 +
(-52 0.0000000000) Type 11 (all call reply) from 8a0261 in reply to interrogator 0 with capability level 6
 +
 
 +
==Catatan Antenna==
  
  
Line 46: Line 56:
  
  
 +
 +
==Membuat Virtual Radar==
  
 
Next time to plot the data. The article  pointed to Virtual radar server at http://www.virtualradarserver.co.uk/Mono.aspx so this was installed. Launching it with and clicking on the http link for local host resulted in the following map with 8 aircraft:-
 
Next time to plot the data. The article  pointed to Virtual radar server at http://www.virtualradarserver.co.uk/Mono.aspx so this was installed. Launching it with and clicking on the http link for local host resulted in the following map with 8 aircraft:-
  
 
The rtl2832 is not as sensitive as the Modesbeast I also have but it is only 5% of the cost!
 
The rtl2832 is not as sensitive as the Modesbeast I also have but it is only 5% of the cost!
−
 
−
 
  
 
==Referensi==
 
==Referensi==
Line 57: Line 67:
 
* http://www.irrational.net/2012/08/06/tracking-planes-for-20-or-less/
 
* http://www.irrational.net/2012/08/06/tracking-planes-for-20-or-less/
 
* http://g4fre.blogspot.com/2012/09/ads-b-using-ubuntu-and-rtl2832.html
 
* http://g4fre.blogspot.com/2012/09/ads-b-using-ubuntu-and-rtl2832.html
 +
* http://www.hamradioscience.com/the-rtl-2832u-sdr-and-ads-b/
 +
 +
==Pranala Menarik==
 +
 +
* [[ADS-B]]
 +
* [[ADS-B: Instalasi gr-air-modes]]
 +
* [[ADS-B: Antenna Strip Line]]
 +
* [[ADS-B: Antenna Vertikal]]

Latest revision as of 17:54, 2 January 2020

gr-air-modes untuk bisa monitor transmisi ADS-B membutuhkan

  • UHD
  • GNURadio
  • RTL-SDR
  • gr_osmoSDR

Lakukan sampai selesai proses


Instalasi gr-air-modes

Install 

apt install pyqt4-dev-tools

Lakukan 

cd /usr/local/src/SDR
git clone https://github.com/bistromath/gr-air-modes.git
cd /usr/local/src/SDR/gr-air-modes/
mkdir build
cd build
cmake ..
make
sudo make install
sudo ldconfig

Jalankan gr-air-modes

Jalankan menggunakan perintah 

modes_rx -d -P

Keluar 

gr-air-modes warning: numpy+scipy not installed, FlightGear interface not supported
gr-osmosdr supported device types: file fcd rtl rtl_tcp 
Using device #0: ezcap USB 2.0 DVB-T/DAB/FM dongle
Found Elonics E4000 tuner
Gain is 34
Rate is 4000000
Using Volk machine: ssse3_32
>>> gr_fir_ccf: using SSE
(-52 0.0000000000) Type 17 BDS0,9-1 (track report) from 8a0261 with velocity 270kt heading 103 VS 2304
(-52 0.0000000000) Type 11 (all call reply) from 8a0261 in reply to interrogator 0 with capability level 6
(-52 0.0000000000) Type 17 BDS0,9-1 (track report) from 8a0261 with velocity 270kt heading 103 VS 2304
(-52 0.0000000000) Type 11 (all call reply) from 8a0261 in reply to interrogator 0 with capability level 6

Catatan Antenna

with a piece of wire in the rtl283 antenna socket resulted in decodes from one aircraft almost overhead. Time for a better 1090MHz antenna. The J pole previously used was easy to build from 2 pieces of semi rigid cable so time to make another.It was tuned with a tracking generator/directional coupler/ spectrum analyser and achieved 32dB retun loss after tweaking. Putting this on the end of 35' of cable in the loft resulted in many more decodes and a torrent of data in the terminal:-


Membuat Virtual Radar

Next time to plot the data. The article pointed to Virtual radar server at http://www.virtualradarserver.co.uk/Mono.aspx so this was installed. Launching it with and clicking on the http link for local host resulted in the following map with 8 aircraft:-

The rtl2832 is not as sensitive as the Modesbeast I also have but it is only 5% of the cost!

Referensi

Pranala Menarik

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=ADS-B:_Instalasi_gr-air-modes&oldid=57980"