Difference between revisions of "FIRMWARE: Update Menggunakan TFTP"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Sumber: http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h#oem.installation.using.the.tftp.method | Sumber: http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h#oem.installation.using.the.tftp.method | ||
| − | Install | + | Install TFTP client, |
sudo apt-get update | sudo apt-get update | ||
sudo apt-get install tftp | sudo apt-get install tftp | ||
| − | + | Siapkan interface PC anda | |
| + | # untuk UBNT | ||
| + | sudo ifconfig eth0:1 192.168.1.100 | ||
| + | |||
| + | # untuk Buffalo | ||
sudo ifconfig eth0:1 192.168.11.2 | sudo ifconfig eth0:1 192.168.11.2 | ||
| − | + | Cek MAC address Router | |
| + | |||
| + | # untuk UBNT | ||
| + | ping 192.168.1.10 | ||
| + | |||
| + | # untuk Buffalo | ||
| + | ping 192.168.11.1 | ||
| + | |||
| + | Ketik | ||
| + | |||
| + | arp -n | ||
| + | |||
| + | Akan keluar seperti | ||
| + | |||
| + | Address HWtype HWaddress Flags Mask Iface | ||
| + | 192.168.1.20 ether 00:15:6d:db:d1:6b C eth0 | ||
| + | |||
| + | |||
| + | Masukan ke tabel arp statik, misalnya | ||
| + | |||
| + | # untuk UBNT | ||
| + | sudo arp -s 192.168.1.20 00:15:6d:db:d1:6b | ||
| + | # untuk Buffalo | ||
sudo arp -s 192.168.11.1 02:aa:bb:cc:dd:1a | sudo arp -s 192.168.11.1 02:aa:bb:cc:dd:1a | ||
| − | + | Siapkan tftp | |
| + | tftp -m binary 192.168.1.20 -c put PicoStation2-v4.0.1.build4978.bin | ||
tftp -m binary 192.168.11.1 -c put openwrt-ar71xx-generic-wzr-hp-g300nh-squashfs-tftp.bin | tftp -m binary 192.168.11.1 -c put openwrt-ar71xx-generic-wzr-hp-g300nh-squashfs-tftp.bin | ||
| + | tftp -v 192.168.2.1 -m binary -c put dd-wrt.v23_mini_generic.bin | ||
| + | Langsung nyalakan router dalam waktu secepat-cepatnya | ||
| + | |||
| + | Di ubuntu rupanya tidak bisa menggunakan command line seperti di atas harus secara manual | ||
| + | |||
| + | tftp 192.168.1.20 | ||
| + | tftp> binary | ||
| + | tftp> trace | ||
| + | fttp> put PicoStation2-v4.0.1.build4978.bin flash_update | ||
| + | .. | ||
| + | .. | ||
| + | received ACK <block=6569> | ||
| + | sent DATA <block=6570, 379 bytes> | ||
| + | received ACK <block=6570> | ||
| + | Sent 3363707 bytes in 19.4 seconds | ||
| + | tftp> | ||
| Line 23: | Line 66: | ||
* http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h#oem.installation.using.the.tftp.method | * http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h#oem.installation.using.the.tftp.method | ||
| + | * https://forum.openwrt.org/viewtopic.php?id=24052 | ||
| + | * http://mohammadthalif.wordpress.com/2010/03/05/installing-and-testing-tftpd-in-ubuntudebian/ | ||
| + | |||
| + | ==Pranala Menarik== | ||
| + | |||
| + | * [[Router firmware]] | ||
| + | * [[OLSR]] | ||
| + | * [[Mesh]] | ||
Latest revision as of 20:35, 20 July 2012
Sumber: http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h#oem.installation.using.the.tftp.method
Install TFTP client,
sudo apt-get update sudo apt-get install tftp
Siapkan interface PC anda
# untuk UBNT sudo ifconfig eth0:1 192.168.1.100
# untuk Buffalo sudo ifconfig eth0:1 192.168.11.2
Cek MAC address Router
# untuk UBNT ping 192.168.1.10
# untuk Buffalo ping 192.168.11.1
Ketik
arp -n
Akan keluar seperti
Address HWtype HWaddress Flags Mask Iface 192.168.1.20 ether 00:15:6d:db:d1:6b C eth0
Masukan ke tabel arp statik, misalnya
# untuk UBNT sudo arp -s 192.168.1.20 00:15:6d:db:d1:6b
# untuk Buffalo sudo arp -s 192.168.11.1 02:aa:bb:cc:dd:1a
Siapkan tftp
tftp -m binary 192.168.1.20 -c put PicoStation2-v4.0.1.build4978.bin tftp -m binary 192.168.11.1 -c put openwrt-ar71xx-generic-wzr-hp-g300nh-squashfs-tftp.bin tftp -v 192.168.2.1 -m binary -c put dd-wrt.v23_mini_generic.bin
Langsung nyalakan router dalam waktu secepat-cepatnya
Di ubuntu rupanya tidak bisa menggunakan command line seperti di atas harus secara manual
tftp 192.168.1.20 tftp> binary tftp> trace fttp> put PicoStation2-v4.0.1.build4978.bin flash_update .. .. received ACK <block=6569> sent DATA <block=6570, 379 bytes> received ACK <block=6570> Sent 3363707 bytes in 19.4 seconds tftp>
Referensi
- http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h#oem.installation.using.the.tftp.method
- https://forum.openwrt.org/viewtopic.php?id=24052
- http://mohammadthalif.wordpress.com/2010/03/05/installing-and-testing-tftpd-in-ubuntudebian/