Difference between revisions of "Open5gs: IMS Install Ubuntu 22.04"

Revision as of 14:03, 30 July 2023

Sumber: https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/

Install paket pendukung di ubuntu 18.04

apt update
apt upgrade -y
apt install -y mysql-server tcpdump screen ntp ntpdate git dkms gcc flex bison \
libmysqlclient-dev make libssl-dev libcurl4-openssl-dev libxml2-dev \
libpcre3-dev bash-completion g++ autoconf rtpproxy libmnl-dev libsctp-dev ipsec-tools \
libradcli-dev libradcli4 python3-dev

Percobaan untuk ubuntu 22.04

apt update
apt upgrade -y
apt install -y mysql-server tcpdump screen ntp ntpdate git dkms gcc flex bison \
libmysqlclient-dev make libssl-dev libcurl4-openssl-dev libxml2-dev \
libpcre3-dev bash-completion g++ autoconf rtpproxy libmnl-dev libsctp-dev strongswan \
libradcli-dev libradcli4 python3-dev

Install MySQL mariadb

apt update
apt upgrade
apt -y install mariadb-server

Install Kamailio

sudo apt -y install kamailio kamailio-mysql-modules kamailio-ims-modules

Edit kamctlrc

sudo vim /etc/kamailio/kamctlrc

DBENGINE=MYSQL
DBHOST=localhost

sudo systemctl restart kamailio
sudo systemctl status kamailio

apt install -y build-essential libssl-dev zlib1g-dev libbz2-dev libreadline-dev libsqlite3-dev curl libncursesw5-dev xz-utils tk-dev libxml2-dev libxmlsec1-dev libffi-dev liblzma-dev

Clone Kamailio repository dan checkout versi 5.7 dari repository

mkdir -p /usr/local/src/
cd /usr/local/src/
git clone https://github.com/herlesupreeth/kamailio
cd kamailio
git checkout -b 5.7 origin/5.7

Generate build config file

cd /usr/local/src/kamailio
make cfg

Enable MySQL module and all required IMS modules. Edit modules.lst file present at /usr/local/src/kamailio/src

vi /usr/local/src/kamailio/src/modules.lst

The contents of modules.lst should be as follows:

# this file is autogenerated by make modules-cfg

# the list of sub-directories with modules
modules_dirs:=modules

# the list of module groups to compile
cfg_group_include=

# the list of extra modules to compile
include_modules= cdp cdp_avp db_mysql dialplan ims_auth ims_charging ims_dialog ims_diameter_server ims_icscf ims_ipsec_pcscf ims_isc ims_ocs ims_qos ims_registrar_pcscf ims_registrar_scscf ims_usrloc_pcscf ims_usrloc_scscf outbound presence presence_conference presence_dialoginfo presence_mwi presence_profile presence_reginfo presence_xml pua pua_bla pua_dialoginfo pua_reginfo pua_rpc pua_usrloc pua_xmpp sctp tls utils xcap_client xcap_server xmlops xmlrpc

# the list of static modules
static_modules=

# the list of modules to skip from compile list
skip_modules=

# the list of modules to exclude from compile list
exclude_modules= acc_json acc_radius app_java app_lua app_lua_sr app_mono app_perl app_python app_python3 app_ruby auth_ephemeral auth_identity auth_radius cnxcc cplc crypto db2_ldap db_berkeley db_cassandra db_mongodb db_oracle db_perlvdb db_postgres db_redis db_sqlite db_unixodbc dnssec erlang evapi geoip geoip2 gzcompress h350 http_async_client http_client jansson janssonrpcc json jsonrpcc kafka kazoo lcr ldap log_systemd lost memcached misc_radius ndb_cassandra ndb_mongodb ndb_redis nsq osp peering phonenum pua_json rabbitmq regex rls rtp_media_server snmpstats systemdops topos_redis uuid websocket xhttp_pi xmpp $(skip_modules)

modules_all= $(filter-out modules/CVS,$(wildcard modules/*))
modules_noinc= $(filter-out $(addprefix modules/, $(exclude_modules) $(static_modules)), $(modules_all)) 
modules= $(filter-out $(modules_noinc), $(addprefix modules/, $(include_modules) )) $(modules_noinc) 
modules_configured:=1

Compile and install Kamailio

cd /usr/local/src/kamailio
export RADCLI=1
make Q=0 all | tee make_all.txt
make install | tee make_install.txt
ldconfig

ERROR

stirshaken_mod.c:28:10: fatal error: stir_shaken.h: No such file or directory
 #include <stir_shaken.h>
          ^06:20, 30 July 2023 (WIB)06:20, 30 July 2023 (WIB)onnowpurbo (talk) 06:20, 30 July 2023 (WIB)
compilation terminated.

The binaries and executable scripts are installed in: /usr/local/sbin

kamailio - Kamailio SIP server
kamdbctl - script to create and manage the Databases
kamctl - script to manage and control Kamailio SIP server
kamcmd - CLI - command line tool to interface with Kamailio SIP server

To be able to use the binaries from command line, make sure that /usr/local/sbin is set in PATH environment variable. You can check that with echo $PATH. If not and you are using bash, open /root/.bash_profile and at the end add:

vi /root/.bash_profile

 PATH=$PATH:/usr/local/sbin
 export PATH

Kamailio modules are installed at: /usr/local/lib64/kamailio/modules

The documentation and readme files are installed at: /usr/local/share/doc/kamailio

The configuration files are installed at: /usr/local/etc/kamailio

In case you set the PREFIX variable in make cfg command, then replace /usr/local in all paths above with the value of PREFIX in order to locate the files installed.

8. Populate MySQL database using kamctlrc command Edit SIP_DOMAIN and DBENGINE in the /usr/local/etc/kamailio/kamctlrc configuration file (Used by kamctl and kamdbctl tools).

Set the SIP_DOMAIN to your SIP service domain (or IP address if you don’t have a DNS hostname associated with your SIP service). Set the DBENGINE to be MYSQL and adjust other setting as you want. Finally, uncomment both SIP_DOMAIN and DBENGINE.

In example above, the following values are set for SIP_DOMAIN and DBENGINE

vi /usr/local/etc/kamailio/kamctlrc

SIP_DOMAIN=ims.mnc001.mcc001.3gppnetwork.org
DBENGINE=MYSQL

You can change other values in kamctlrc file. Once you are done updating kamctlrc file, run the script to create the database used by Kamailio:

kamdbctl create

When prompted for mysql root user password enter the root password if its is set or else leave it blank i.e. Press Enter

check database manually;

mysql
<mysql> show databases;
<mysql> use kamailio;
<mysql> show tables;
<mysql> select * from subscriber;

No Subscribers are added yet

The kamdbctl will add two users in MySQL user tables:

kamailio   - (with default password 'kamailiorw') - user which has full access rights to 'kamailio' database
kamailioro - (with default password 'kamailioro') - user which has read-only access rights to 'kamailio' database

9. Edit /etc/default/rtpproxy file as follows:

# Defaults for rtpproxy

# The control socket.
#CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock"
# To listen on an UDP socket, uncomment this line:
#CONTROL_SOCK=udp:127.0.0.1:22222
CONTROL_SOCK=udp:127.0.0.1:7722

# Additional options that are passed to the daemon.
EXTRA_OPTS="-l 172.24.15.30 -d DBUG:LOG_LOCAL0"

here, -l <PUBLIC_IP>

Then run,

systemctl restart rtpproxy

10. Edit configuration file to fit your requirements for the VoIP platform: You have to edit the /usr/local/etc/kamailio/kamailio.cfg configuration file.

Follow the instruction in the comments to enable usage of MySQL. Basically you have to add several lines at the top of config file, like:

#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_NAT

(uncomment this line)
auto_aliases=no

(uncomment this line and enter the DNS domain created above)
alias="ims.mnc001.mcc001.3gppnetwork.org"

(uncomment this line, 10.4.128.21 is the internal IP and 172.24.15.30 is the Public/Floating IP)
listen=udp:10.4.128.21:5060 advertise 172.24.15.30:5060
listen=tcp:10.4.128.21:5060 advertise 172.24.15.30:5060

(Further down, we will need to modify the rtpproxy_sock value to match the CONTROL_SOCK option we set for RTPProxy in /etc/default/rtpproxy)

modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")

If you changed the password for the ‘kamailio’ user of MySQL, you have to update the value for ‘DBURL’ parameters.

11. The init.d script

The init.d script can be used to start/stop the Kamailio server in a nicer way. A sample of init.d script for Kamailio is provided at:

/usr/local/src/kamailio/pkg/kamailio/deb/debian/kamailio.init

Just copy the init file into the /etc/init.d/kamailio. Then change the permissions:

cp /usr/local/src/kamailio/pkg/kamailio/deb/bionic/kamailio.init /etc/init.d/kamailio
chmod 755 /etc/init.d/kamailio

Then edit the /etc/init.d/kamailio file updating the $DAEMON and $CFGFILE values:

PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin
DAEMON=/usr/local/sbin/kamailio
CFGFILE=/usr/local/etc/kamailio/kamailio.cfg

You need to setup a configuration file in the /etc/default/ directory. This file can be found at:

/usr/local/src/kamailio/pkg/kamailio/deb/bionic/kamailio.default

You need to rename the /etc/default/kamailio file to ‘kamailio’ after you’ve copied it. Then edit this file and set RUN_KAMAILIO=yes. Edit the other options as per your setup.

cp /usr/local/src/kamailio/pkg/kamailio/deb/bionic/kamailio.default /etc/default/kamailio
systemctl daemon-reload

Create the directory for pid file:

mkdir -p /var/run/kamailio

Default setting is to run Kamailio as user kamailio and group kamailio. For that you need to create the user and set ownership

adduser --quiet --system --group --disabled-password \
        --shell /bin/false --gecos "Kamailio" \
        --home /var/run/kamailio kamailio
chown kamailio:kamailio /var/run/kamailio

Then you can start Kamailio using the following commands:

systemctl start kamailio.service

check running processes with: ps axw egrep kamailio

12. A quick check for the basic working of SIP server can be done as follows: Create new subscriber accounts. A new account can be added using kamctl tool via kamctl add <username> <password> (When asked for entering MySQL password for user kamailio@localhost: type kamailiorw, as provided in kamailio.cfg)

kamctl add test testpasswd
kamctl add test2 testpasswd

Setting on OnePlus phones

Connect to a network through which SIP server is reachable (either Wi-Fi or LTE) Goto phone dialer and select the Settings in the menu on top right corner Then select Call settings Configure SIP accounts in phones as added above using kamctl: In Phone 1:

Username: test Password: testpasswd Server: ims.mnc001.mcc001.3gppnetwork.org (Created DNS Domain Name or IP to which IMS components are bound to, visible interface IP address) Optional Settings:

   Authentication username: test
   Outbound proxy address: 172.24.15.30 (Floating IP of VM in case of OpenStack or else no need to fill in case of physical machine)
   Transport type: UDP

In Phone 2:

Username: test2 Password: testpasswd Server: ims.mnc001.mcc001.3gppnetwork.org (Created DNS Domain Name or IP to which IMS components are bound to, visible interface IP address) Optional Settings:

   Authentication username: test2
   Outbound proxy address: 172.24.15.30 (Floating IP of VM in case of OpenStack or else no need to fill in case of physical machine)
   Transport type: UDP

Set “Receive incoming calls” option to enabled state in both phones Set “Use SIP calling” to “For all calls” Add a new contact as follows: In Phone 1:

Select more option

Name: SIP Contact test2 (Any arbitary name) SIP: test2@ims.mnc001.mcc001.3gppnetwork.org (Created DNS Domain Name or IP to which IMS components are bound to, visible interface IP address) Save and exit

In Phone 2:

Select more option

Name: SIP Contact test (Any arbitary name) SIP: test@ims.mnc001.mcc001.3gppnetwork.org (Created DNS Domain Name or IP to which IMS components are bound to, visible interface IP address) Save and exit

Now try calling from either phone Upon completion of this test, set “Receive incoming calls” option to disabled state and set “Use SIP calling” to “Only for SIP calls”

13. Create new mysql database for pcscf, scscf and icscf, populate databases and grant permissions to respective users identified by a password $ mysql <mysql> CREATE DATABASE `pcscf`; <mysl> CREATE DATABASE `scscf`; <mysl> CREATE DATABASE `icscf`; In all of the below steps, when prompted for mysql root user password, leave it blank i.e. Press Enter

$ cd /usr/local/src/kamailio/utils/kamctl/mysql $ mysql -u root -p pcscf < standard-create.sql $ mysql -u root -p pcscf < presence-create.sql $ mysql -u root -p pcscf < ims_usrloc_pcscf-create.sql $ mysql -u root -p pcscf < ims_dialog-create.sql

$ mysql -u root -p scscf < standard-create.sql $ mysql -u root -p scscf < presence-create.sql $ mysql -u root -p scscf < ims_usrloc_scscf-create.sql $ mysql -u root -p scscf < ims_dialog-create.sql $ mysql -u root -p scscf < ims_charging-create.sql

$ cd /usr/local/src/kamailio/misc/examples/ims/icscf $ mysql -u root -p icscf < icscf.sql Verify that following tables are present in respective databases by logging into mysql

+-----------------+
| Tables_in_pcscf |
+-----------------+
| active_watchers |
| dialog_in       |
| dialog_out      |
| dialog_vars     |
| location        |
| presentity      |
| pua             |
| version         |
| watchers        |
| xcap            |
+-----------------+

+-----------------+
| Tables_in_scscf |
+-----------------+
| active_watchers |
| contact         |
| dialog_in       |
| dialog_out      |
| dialog_vars     |
| impu            |
| impu_contact    |
| impu_subscriber |
| presentity      |
| pua             |
| ro_session      |
| subscriber      |
| version         |
| watchers        |
| xcap            |
+-----------------+

+---------------------+
| Tables_in_icscf     |
+---------------------+
| nds_trusted_domains |
| s_cscf              |
| s_cscf_capabilities |
+---------------------+

<mysql> grant delete,insert,select,update on pcscf.* to pcscf@localhost identified by 'heslo'; <mysql> grant delete,insert,select,update on scscf.* to scscf@localhost identified by 'heslo'; <mysql> grant delete,insert,select,update on icscf.* to icscf@localhost identified by 'heslo'; <mysql> grant delete,insert,select,update on icscf.* to provisioning@localhost identified by 'provi'; <mysql> GRANT ALL PRIVILEGES ON pcscf.* TO 'pcscf'@'%' identified by 'heslo'; <mysql> GRANT ALL PRIVILEGES ON scscf.* TO 'scscf'@'%' identified by 'heslo'; <mysql> GRANT ALL PRIVILEGES ON icscf.* TO 'icscf'@'%' identified by 'heslo'; <mysql> GRANT ALL PRIVILEGES ON icscf.* TO 'provisioning'@'%' identified by 'provi'; <mysql> FLUSH PRIVILEGES; Then,

$ mysql <mysql> use icscf; <mysql> INSERT INTO `nds_trusted_domains` VALUES (1,'ims.mnc001.mcc001.3gppnetwork.org'); <mysql> INSERT INTO `s_cscf` VALUES (1,'First and only S-CSCF','sip:scscf.ims.mnc001.mcc001.3gppnetwork.org:6060'); <mysql> INSERT INTO `s_cscf_capabilities` VALUES (1,1,0),(2,1,1);

14. Copy pcscf, icscf and scscf configuration files to /etc folder and edit accordingly

cd ~ && git clone https://github.com/herlesupreeth/Kamailio_IMS_Config
cd Kamailio_IMS_Config
cp -r kamailio_icscf /etc
cp -r kamailio_pcscf /etc
cp -r kamailio_scscf /etc

15. Setup the DNS for resolving IMS and EPC components names

apt install -y bind9

Use the below example DNS Zone file to create a DNS Zone file into the bind folder and edit /etc/bind/named.conf.local and /etc/bind/named.conf.options accordingly:

cd /etc/bind

In the below example: Kamailio IMS & DNS server running at 10.4.128.21/172.24.15.30 (Floating IP) and PCRF also at 10.4.128.21/172.24.15.30 (Floating IP)

$ cat ims.mnc001.mcc001.3gppnetwork.org

$ORIGIN ims.mnc001.mcc001.3gppnetwork.org. $TTL 1W @ 1D IN SOA localhost. root.localhost. (

                                       1               ; serial
                                       3H              ; refresh
                                       15M             ; retry
                                       1W              ; expiry
                                       1D )            ; minimum

                       1D IN NS        ns

ns 1D IN A 10.4.128.21

pcscf 1D IN A 10.4.128.21 _sip._udp.pcscf 1D SRV 0 0 5060 pcscf _sip._tcp.pcscf 1D SRV 0 0 5060 pcscf

icscf 1D IN A 10.4.128.21 _sip._udp 1D SRV 0 0 4060 icscf _sip._tcp 1D SRV 0 0 4060 icscf

scscf 1D IN A 10.4.128.21 _sip._udp.scscf 1D SRV 0 0 6060 scscf _sip._tcp.scscf 1D SRV 0 0 6060 scscf

hss 1D IN A 10.4.128.21 Create another DNS zone for resolving pcrf domain as follows:

$ cat epc.mnc001.mcc001.3gppnetwork.org

$ORIGIN epc.mnc001.mcc001.3gppnetwork.org. $TTL 1W @ 1D IN SOA localhost. root.localhost. (

                                       1               ; serial
                                       3H              ; refresh
                                       15M             ; retry
                                       1W              ; expiry
                                       1D )            ; minimum

                       1D IN NS        epcns

epcns 1D IN A 10.4.128.21

pcrf 1D IN A 127.0.0.5 Edit /etc/bind/named.conf.local file as follows:

// // Do any local configuration here //

// Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918";

zone "ims.mnc001.mcc001.3gppnetwork.org" {

       type master;
       file "/etc/bind/ims.mnc001.mcc001.3gppnetwork.org";

};

zone "epc.mnc001.mcc001.3gppnetwork.org" {

       type master;
       file "/etc/bind/epc.mnc001.mcc001.3gppnetwork.org";

}; Edit /etc/bind/named.conf.options file as follows:

options {

       directory "/var/cache/bind";

       // If there is a firewall between you and nameservers you want
       // to talk to, you may need to fix the firewall to allow multiple
       // ports to talk.  See http://www.kb.cert.org/vuls/id/800113

       // If your ISP provided one or more IP addresses for stable
       // nameservers, you probably want to use them as forwarders.
       // Uncomment the following block, and insert the addresses replacing
       // the all-0's placeholder.

       //forwarders {
       // Put here the IP address of other DNS server which could be used if name cannot be resolved with DNS server running in this machine (Optional)
       //10.4.128.2;
       //};

       //========================================================================
       // If BIND logs error messages about the root key being expired,
       // you will need to update your keys.  See https://www.isc.org/bind-keys
       //========================================================================
       dnssec-validation no;
       allow-query { any; };

       auth-nxdomain no;    # conform to RFC1035
       //listen-on-v6 { any; };

}; $ systemctl restart bind9 Then, test DNS resolution by adding following entries on top of all other entries in /etc/resolv.conf (make sure it persist across reboots)

search ims.mnc001.mcc001.3gppnetwork.org nameserver 10.4.128.21 Finally, ping to ensure

$ ping pcscf PING pcscf.ims.mnc001.mcc001.3gppnetwork.org (10.4.128.21) 56(84) bytes of data. 64 bytes from localhost (10.4.128.21): icmp_seq=1 ttl=64 time=0.017 ms 64 bytes from localhost (10.4.128.21): icmp_seq=2 ttl=64 time=0.041 ms To make changes in /etc/resolv.conf be persistent across reboot edit the /etc/netplan/50-cloud-init.yaml file as follows:

This file is generated from information provided by
the datasource. Changes to it will not persist across an instance.
To disable cloud-init's network configuration capabilities, write a file
/etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following:
network: {config: disabled}

network:

   version: 2
   ethernets:
       ens3:
           dhcp4: true
           match:
               macaddress: fa:16:3e:99:f5:67
           set-name: ens3
           nameservers:
               search: [ims.mnc001.mcc001.3gppnetwork.org,epc.mnc001.mcc001.3gppnetwork.org]
               addresses:
                     - 10.4.128.21
   version: 2

$ netplan apply $ ln -sf /run/systemd/resolve/resolv.conf /etc/resolv.conf $ systemctl restart systemd-resolved.service

16. Install RTPEngine Check for dependencies, install dependencies and build .deb packages

export DEB_BUILD_PROFILES="pkg.ngcp-rtpengine.nobcg729"
apt install dpkg-dev
git clone https://github.com/sipwise/rtpengine
cd rtpengine && git checkout mr7.4.1
dpkg-checkbuilddeps

The above command checks for dependencies and give you a list of dependencies which are missing in the system. The below list is the result of this command

apt install debhelper default-libmysqlclient-dev gperf iptables-dev libavcodec-dev libavfilter-dev libavformat-dev libavutil-dev libbencode-perl libcrypt-openssl-rsa-perl libcrypt-rijndael-perl libdigest-crc-perl libdigest-hmac-perl libevent-dev libhiredis-dev libio-multiplex-perl libio-socket-inet6-perl libiptc-dev libjson-glib-dev libnet-interface-perl libpcap0.8-dev libsocket6-perl libspandsp-dev libswresample-dev libsystemd-dev libxmlrpc-core-c3-dev markdown dkms module-assistant keyutils libnfsidmap2 libtirpc1 nfs-common rpcbind

After installing dependencies run the below command again and verify that no dependencies are left out

dpkg-checkbuilddeps

This should just return back to shell with no output if all depedencies are met

dpkg-buildpackage -uc -us
cd ..
dpkg -i *.deb
cp /etc/rtpengine/rtpengine.sample.conf /etc/rtpengine/rtpengine.conf

Edit this file as follows under [rtpengine]:

interface = 10.4.128.21

Port on which rtpengine binds i.e. listen_ng parameter is udp port 2223. This should be updated in kamailio_pcscf.cfg file at modparam(rtpengine …)

----- rtpproxy params -----

modparam("rtpengine", "rtpengine_sock", "1 == udp:localhost:2223") Edit /etc/default/ngcp-rtpengine-daemon and /etc/default/ngcp-rtpengine-recording-daemon as follows in respective files:

RUN_RTPENGINE=yes RUN_RTPENGINE_RECORDING=yes $ cp /etc/rtpengine/rtpengine-recording.sample.conf /etc/rtpengine/rtpengine-recording.conf $ mkdir /var/spool/rtpengine $ systemctl restart ngcp-rtpengine-daemon.service ngcp-rtpengine-recording-daemon.service ngcp-rtpengine-recording-nfs-mount.service $ systemctl enable ngcp-rtpengine-daemon.service ngcp-rtpengine-recording-daemon.service ngcp-rtpengine-recording-nfs-mount.service

$ systemctl stop rtpproxy $ systemctl disable rtpproxy $ systemctl mask rtpproxy Second instance of RTPENGINE can be run as follows (Optional)

$ iptables -I rtpengine -p udp -j RTPENGINE --id 1 $ ip6tables -I INPUT -p udp -j RTPENGINE --id 1 $ echo 'del 1' > /proc/rtpengine/control $ /usr/sbin/rtpengine --table=1 --interface=10.4.128.21 --listen-ng=127.0.0.1:2224 --tos=184 --pidfile=ngcp-rtpengine-daemon2.pid --no-fallback --foreground 17. Running I-CSCF, P-CSCF and S-CSCF as separate process First, stop the default kamailio SIP server

$ systemctl stop kamailio $ systemctl disable kamailio $ systemctl mask kamailio Run all the process as root and NOT sudo

$ mkdir -p /var/run/kamailio_pcscf $ kamailio -f /etc/kamailio_pcscf/kamailio_pcscf.cfg -P /kamailio_pcscf.pid -DD -E -e $ mkdir -p /var/run/kamailio_scscf $ kamailio -f /etc/kamailio_scscf/kamailio_scscf.cfg -P /kamailio_scscf.pid -DD -E -e $ mkdir -p /var/run/kamailio_icscf $ kamailio -f /etc/kamailio_icscf/kamailio_icscf.cfg -P /kamailio_icscf.pid -DD -E -e 18. Install Open5GS in the same machine as Kamailio IMS - Install Open5GS from source Please refer to instructions at https://open5gs.org/open5gs/docs/guide/02-building-open5gs-from-sources/

If you are using OpenStack, installing Open5GS and Kamailio IMS on the same machine is very important because the Framed-IP-Address in the AAR request via Rx interface takes received IP address and port in ims_qos module, hence, if the Open5GS is on a separate VM/machine, the IP and port received in received_ip and received_port values seen by Kamailio IMS will be the NATed IP of the Open5GS machine resulting in failing of AAR request.

Modify below mentioned parts of configuration files in addition to Configure Open5GS section. For reference, look at the configuration files at https://github.com/herlesupreeth/Open5gs_Config. These configuration only holds for open5gs tag v1.3.0, please tweak configuration files based on the open5gs tag you use.

Change realm of components to epc.mnc001.mcc001.3gppnetwork.org Define IP pools for APNs used i.e one for default APN and another for IMS apn Define P-CSCF address in the pgw configuration Define a ConnectPeer for pcscf.ims.mnc001.mcc001.3gppnetwork.org with its IP and port in PCRF freediameter configuration Setup IP tables for the UE pools defined and create appropriate tun interfaces Below startup script can be used for setting up interfaces:

!/bin/bash

sudo sysctl -w net.ipv4.ip_forward=1 sudo sysctl -w net.ipv6.conf.all.forwarding=1

ip tuntap add name ogstun mode tun ip addr add 192.168.100.1/24 dev ogstun ip addr add fd84:6aea:c36e:2b69::/48 dev ogstun ip link set ogstun mtu 1400 ip link set ogstun up iptables -t nat -A POSTROUTING -s 192.168.100.0/24 ! -o ogstun -j MASQUERADE ip6tables -t nat -A POSTROUTING -s fd84:6aea:c36e:2b69::/48 ! -o ogstun -j MASQUERADE iptables -I INPUT -i ogstun -j ACCEPT ip6tables -I INPUT -i ogstun -j ACCEPT

ip tuntap add name ogstun2 mode tun ip addr add 192.168.101.1/24 dev ogstun2 ip addr add fd1f:76f3:da9b:0101::/48 dev ogstun2 ip link set ogstun2 mtu 1400 ip link set ogstun2 up iptables -t nat -A POSTROUTING -s 192.168.101.0/24 ! -o ogstun2 -j MASQUERADE ip6tables -t nat -A POSTROUTING -s fd1f:76f3:da9b:0101::/48 ! -o ogstun2 -j MASQUERADE iptables -I INPUT -i ogstun2 -j ACCEPT ip6tables -I INPUT -i ogstun2 -j ACCEPT

ufw disable Add users with following APN settings in Open5GS:

APN Configuration:

| internet | IPv4 | 9 | 8 | Disabled | Disabled | unlimited/unlimited | | |

| ims | IPv4 | 5 | 1 | Disabled | Disabled | 3850/1530 | | | | | | 1 | 2 | Enabled | Enabled | 128/128 | 128/128 | | | | | 2 | 4 | Enabled | Enabled | 128/128 | 128/128 | |

Finally, make sure of the following in Open5GS

PCO options which indicate the address of the Proxy-CSCF Need to indicate support for Voice-over-Packet-Switched (VoPS) in NAS message to UE from EPC 19. Setup FoHSS in order to talk with I-CSCF and S-CSCF Requirements for FoHSS: Install Java JDK and ant

Download Oracle Java 7 JDK from following link using a browser:

https://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase7-521261.html $ mkdir -p /usr/lib/jvm/ $ tar -zxf jdk-7u79-linux-x64.tar.gz -C /usr/lib/jvm/ $ update-alternatives --install /usr/bin/java java /usr/lib/jvm/jdk1.7.0_79/bin/java 100 $ update-alternatives --install /usr/bin/javac javac /usr/lib/jvm/jdk1.7.0_79/bin/javac 100 Verify that java has been successfully configured by running:

$ update-alternatives --display java java - auto mode

 link best version is /usr/lib/jvm/jdk1.7.0_79/bin/java
 link currently points to /usr/lib/jvm/jdk1.7.0_79/bin/java
 link java is /usr/bin/java

/usr/lib/jvm/jdk1.7.0_79/bin/java - priority 100

$ update-alternatives --display javac javac - auto mode

 link best version is /usr/lib/jvm/jdk1.7.0_79/bin/javac
 link currently points to /usr/lib/jvm/jdk1.7.0_79/bin/javac
 link javac is /usr/bin/javac

/usr/lib/jvm/jdk1.7.0_79/bin/javac - priority 100

$ update-alternatives --config java (select java jdk1.7.0_79) $ update-alternatives --config javac Check java version

$ java -version java version "1.7.0_79" Java(TM) SE Runtime Environment (build 1.7.0_79-b15) Java HotSpot(TM) 64-Bit Server VM (build 24.79-b02, mixed mode) Install Ant

$ cd ~ $ wget http://archive.apache.org/dist/ant/binaries/apache-ant-1.9.14-bin.tar.gz $ tar xvfvz apache-ant-1.9.14-bin.tar.gz $ mv apache-ant-1.9.14 /usr/local/ $ sh -c 'echo ANT_HOME=/usr/local/ >> /etc/environment' $ ln -s /usr/local/apache-ant-1.9.14/bin/ant /usr/bin/ant Verfiy ant version as follows:

$ ant -version Apache Ant(TM) version 1.9.14 compiled on March 12 2019 Create working directories for OpenIMSCore:

$ mkdir /opt/OpenIMSCore $ cd /opt/OpenIMSCore Download:

$ git clone https://github.com/herlesupreeth/FHoSS Compile:

$ cd FHoSS $ export JAVA_HOME="/usr/lib/jvm/jdk1.7.0_79" $ export CLASSPATH="/usr/lib/jvm/jdk1.7.0_79/jre/lib/" $ ant compile deploy | tee ant_compile_deploy.txt Create configurator.sh using below script to change domain names and IP address in all configuration files

$ cd deploy $ vim configurator.sh

!/bin/bash

Initialization & global vars
if you execute this script for the second time
you should change these variables to the latest
domain name and ip address

DDOMAIN="open-ims\.test" DSDOMAIN="open-ims\\\.test" DEFAULTIP="127\.0\.0\.1" CONFFILES=`ls *.cfg *.xml *.sql *.properties 2>/dev/null`

Interaction

printf "Domain Name:" read domainname printf "IP Adress:" read ip_address

input domain is to be slashed for cfg regexes

slasheddomain=`echo $domainname | sed 's/\./\\\\\\\\\./g'`

 if [ $# != 0 ] 
 then 
 printf "changing: "
     for j in $* 
     do
   sed -i -e "s/$DDOMAIN/$domainname/g" $j
   sed -i -e "s/$DSDOMAIN/$slasheddomain/g" $j
   sed -i -e "s/$DEFAULTIP/$ip_address/g" $j
   printf "$j " 
     done
 echo 
 else 
 printf "File to change [\"all\" for everything, \"exit\" to quit]:"
 # loop
     while read filename ;
     do
       if [ "$filename" = "exit" ] 
       then 
       printf "exitting...\n"
       break ;

     elif [ "$filename" = "all" ]
     then    
         printf "changing: "
        for i in $CONFFILES 
        do
       sed -i -e "s/$DDOMAIN/$domainname/g" $i
       sed -i -e "s/$DSDOMAIN/$slasheddomain/g" $i
       sed -i -e "s/$DEFAULTIP/$ip_address/g" $i
       
       printf "$i " 
        done 
        echo 
        break;

       elif [ -w $filename ] 
       then
           printf "changing $filename \n"
           sed -i -e "s/$DDOMAIN/$domainname/g" $filename
           sed -i -e "s/$DSDOMAIN/$slasheddomain/g" $filename
           sed -i -e "s/$DEFAULTIP/$ip_address/g" $filename

         else 
         printf "cannot access file $filename. skipping... \n" 
       fi
       printf "File to Change:"
     done 
 fi

$ chmod +x configurator.sh $ ./configurator.sh Domain Name:ims.mnc001.mcc001.3gppnetwork.org IP Adress:10.4.128.21

$ grep -r "open-ims" (Change realm name in the below file from open-ims.test to ims.mnc001.mcc001.3gppnetwork.org) $ vim webapps/hss.web.console/WEB-INF/web.xml $ vim hibernate.properties And, change the following line:

hibernate.connection.url=jdbc:mysql://127.0.0.1:3306/hss_db $ cp configurator.sh ../scripts/ $ cd ../scripts $ grep -r "open-ims" $ ./configurator.sh Domain Name:ims.mnc001.mcc001.3gppnetwork.org IP Adress:10.4.128.21

$ cp configurator.sh ../config/ $ cd ../config $ ./configurator.sh Domain Name:ims.mnc001.mcc001.3gppnetwork.org IP Adress:10.4.128.21

$ cd ../src-web $ vim WEB-INF/web.xml And, change open-ims.test to ims.mnc001.mcc001.3gppnetwork.org

Prepare mysql database:

$ mysql <mysql> drop database hss_db; <mysql> create database hss_db; <mysql> quit Import database located at /opt/OpenIMSCore into hss_db

$ cd /opt/OpenIMSCore $ mysql -u root -p hss_db < FHoSS/scripts/hss_db.sql $ mysql -u root -p hss_db < FHoSS/scripts/userdata.sql Check grants for mysql access rights at first time installation:

$ mysql

See last line in hss_db.sql:

<mysql> grant delete,insert,select,update on hss_db.* to hss@localhost identified by 'hss'; <mysql> grant delete,insert,select,update on hss_db.* to hss@'%' identified by 'hss'; Check database if domain names are o.k. in various entries and privileges

$ mysql -u hss -p <mysql> show databases; <mysql> use hss_db; <mysql> select * from impu; Prepare script-file, start HSS

Copy startup.sh to hss.sh in root directory

$ cp /opt/OpenIMSCore/FHoSS/deploy/startup.sh /root/hss.sh And, add the following to hss.sh before echo Building Classpath

cd /opt/OpenIMSCore/FHoSS/deploy JAVA_HOME="/usr/lib/jvm/jdk1.7.0_79" CLASSPATH="/usr/lib/jvm/jdk1.7.0_79/jre/lib/" Start HSS using hss.sh

$ ./hss.sh Access the web-interface of HSS: http://<IMS_VM_FLOATING_IP>:8080/hss.web.console/

For example, http://172.24.15.30:8080/hss.web.console/

user: hssAdmin password: hss Then, edit the /etc/hosts file as follows:

In the below example. epc-ims is the hostname of the machine

root@epc-ims:~# cat /etc/hosts 127.0.0.1 localhost 127.0.0.1 epc-ims 20. Add IMS subscription use in FoHSS as follows from the Web GUI Assuming IMSI of the user as 001010123456791 and MSISDN is 0198765432100

Login to the HSS web console. Navigate to the User Identities page Create the IMSU Click IMS Subscription / Create Enter: Name = 001010123456791 Capabilities Set = cap_set1 Preferred S-CSCF = scsf1 Click Save

Create the IMPI and Associate the IMPI to the IMSU Click Create & Bind new IMPI Enter: Identity = 001010123456791@ims.mnc001.mcc001.3gppnetwork.org Secret Key = 8baf473f2f8fd09487cccbd7097c6862 (Ki value as in Open5GS HSS database) Authentication Schemes - All Default = Digest-AKAv1-MD5 AMF = 8000 (As in Open5GS HSS database) OP = 11111111111111111111111111111111 (As in Open5GS HSS database) SQN = 000000021090 (SQN value as in Open5GS HSS database) Click Save

Create and Associate IMPI to IMPU Click Create & Bind new IMPU Enter: Identity = sip:001010123456791@ims.mnc001.mcc001.3gppnetwork.org Barring = Yes Service Profile = default_sp Charging-Info Set = default_charging_set IMPU Type = Public_User_Identity Click Save

Add Visited Network to IMPU Enter: Visited Network = ims.mnc001.mcc001.3gppnetwork.org Click Add

Now, goto Public User Identity and create further IMPUs as following

1. tel:0198765432100

Public User Identity -IMPU- Identity = tel:0198765432100 Service Profile = default_sp Charging-Info Set = default_charging_set Can Register = Yes IMPU Type = Public_User_Identity Click Save

Add Visited Network to IMPU Enter: Visited Network = ims.mnc001.mcc001.3gppnetwork.org Click Add

Associate IMPI(s) to IMPU IMPI Identity = 001010123456791@ims.mnc001.mcc001.3gppnetwork.org Click Add

2. sip:0198765432100@ims.mnc001.mcc001.3gppnetwork.org

Public User Identity -IMPU- Identity = sip:0198765432100@ims.mnc001.mcc001.3gppnetwork.org Service Profile = default_sp Charging-Info Set = default_charging_set Can Register = Yes IMPU Type = Public_User_Identity Click Save

Add Visited Network to IMPU Enter: Visited Network = ims.mnc001.mcc001.3gppnetwork.org Click Add

Associate IMPI(s) to IMPU IMPI Identity = 001010123456791@ims.mnc001.mcc001.3gppnetwork.org Click Add

And, finally add these IMPUs as implicit set of IMSI derived IMPU in HSS i.e sip:001010123456791@ims.mnc001.mcc001.3gppnetwork.org as follows:

1. Goto to IMPU sip:001010123456791@ims.mnc001.mcc001.3gppnetwork.org 2. In "Add IMPU(s) to Implicit-Set" section give IMPU Identity created above to be added to this IMPU 21. APN settings Clear all previous APN settings

Then, create APN as follows:

First create internet APN, APN name: internet, APN type: default –> Save APN Then, create ims APN, APN name: ims, APN type: ims –> Save APN 22. eNB settings Must have in the eNB:

Support for QoS Support for Dedicated radio bearer creation Make sure to check the DRB configuration with respect to QCI of APN accordingly (QCI 5 for ims) On the eNB machine have the following static routes (since internal IP of the VM is advertised in S1AP messages and UE wont find the core in Uplink)

$ ip r add 10.4.128.21/32 via 172.24.15.30 23. USIM and UE settings Make sure to disable SQN check in Sysmocom SIM cards using sysmo-usim-tool tool https://github.com/herlesupreeth/sysmo-usim-tool Tested with OnePlus 5 with following methods (Official Google method is the recommended method to prevent damage to phone) (Official Google method) - Please follow the instructions in the following link @herlesupreeth/CoIMS_Wiki to force enable VoLTE using Carrier Privileges (Risky method) With modfication to enable force IMS registration is a must or else UE will not even attempt to connect to P-CSCF. Need to apply the fix back after each update. https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542 24. Start IMS components and FoHSS followed by Open5GS and eNB, then try connecting the phones 25. Test voice call Assuming IMSI of the user1 as 001010123456791 and MSISDN is 0198765432100 and IMSI of the user2 as 001010123456792 and MSISDN is 0298765432100. Try calling user2 from user1 by dialing its MSISDN ie. 0298765432100

You can see the sample traffic. – [volte.pcapng]. 26. For debugging Debug using wireshark at Open5GS machine and following wireshark display filter

s1ap || gtpv2 || pfcp || diameter || diameter.3gpp || sip Also,

Debugging Diameter messages between PCRF and P-CSCF in Wireshark if the TCP/SCTP port other than 3868

Open Wireshark –> Preferences –> Protocols –> Diameter –> Change to whatever ports are being used

Referensi

https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/

Pranala Menarik

5G

Difference between revisions of "Open5gs: IMS Install Ubuntu 22.04"

Revision as of 14:03, 30 July 2023

Contents

Install MySQL mariadb

Install Kamailio

ERROR

Referensi

Pranala Menarik

Navigation menu

Search