Difference between revisions of "5G: Ettus B210 Compatible"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (Created page with "https://www.aliexpress.com/item/4000618537307.html?spm=a2g0o.detail.1000023.13.31131acfyuzXRd TZT B200 Advance Version 70-6000MHz SDR Radio Software Defined Radio USB3.0 SDR...") |
Onnowpurbo (talk | contribs) |
||
| Line 5: | Line 5: | ||
Specifications: | Specifications: | ||
| − | + | Data interface: usb3.0 | |
| − | + | FPGA: for Spartan 6 XC6SLX75 | |
| − | + | Transceiver: AD9361 dual channel rf transceiver | |
| − | + | IIP3 (at typical NF): -20dBm | |
| − | + | Power Output: > 10dBm | |
| − | + | Receive Noise Figure: < 8dB | |
| − | + | ADC Sample Rate (Max.): 61.44MS/s | |
| − | + | ADC Resolution: 12 bits | |
| − | + | DAC Sample Rate (Max.): 61.44MS/s | |
| − | + | DAC Resolution: 12 bits | |
| − | + | Host Sample Rate (16b): 61.44MS/s | |
| − | + | Frequency Accuracy(without reference clock): ±2.0ppm | |
| − | + | Frequency Accuracy(with reference clock): ±1PPB (0.001PPM) | |
| − | + | Size: 150 x 100mm/5.9 x 3.9" | |
| − | + | Frequency range: 70-6000Mhz | |
| − | + | TX port count: 2 | |
| − | + | RX port count: 2 | |
Package Included: | Package Included: | ||
| − | + | 1 x SDR Radio | |
| − | + | 1 x USB Cable | |
| − | + | 1 x Pin Cable | |
More Information: | More Information: | ||
| Line 32: | Line 32: | ||
To use our fpga firmware you need to modify B200 advance to B210. using below command to modify B200 to B210: | To use our fpga firmware you need to modify B200 advance to B210. using below command to modify B200 to B210: | ||
| − | sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="product=2" | + | |
| + | sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="product=2" | ||
After this you need to unplug b200 advance and replug it. If you don't know where usrp_burn_mb_eeprom is you can find it: | After this you need to unplug b200 advance and replug it. If you don't know where usrp_burn_mb_eeprom is you can find it: | ||
| − | cd / | + | |
| − | sudo find -name usrp_burn_mb_eeprom | + | cd / |
| + | sudo find -name usrp_burn_mb_eeprom | ||
Then copy our fpga firmware to original B210 fpga firmware path. But you may need to save original B210 fpga firmware first. | Then copy our fpga firmware to original B210 fpga firmware path. But you may need to save original B210 fpga firmware first. | ||
| − | sudo cp /usr/share/uhd/images/usrp_b210_fpga.bin /usr/share/uhd/images/usrp_b210_fpga_back.bin | + | |
| − | sudo cp ./b200_fpga_2tx.bin /usr/share/uhd/images/usrp_b210_fpga.bin | + | sudo cp /usr/share/uhd/images/usrp_b210_fpga.bin /usr/share/uhd/images/usrp_b210_fpga_back.bin |
| + | sudo cp ./b200_fpga_2tx.bin /usr/share/uhd/images/usrp_b210_fpga.bin | ||
The original fpga firmware path is depend on uhd version. You can find it using find command. To modify B210 to B200 you can run this command: | The original fpga firmware path is depend on uhd version. You can find it using find command. To modify B210 to B200 you can run this command: | ||
| − | sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="product=1" | + | |
| + | sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="product=1" | ||
Revision as of 17:06, 24 December 2022
https://www.aliexpress.com/item/4000618537307.html?spm=a2g0o.detail.1000023.13.31131acfyuzXRd
TZT B200 Advance Version 70-6000MHz SDR Radio Software Defined Radio USB3.0 SDR Transceiver with Shell
Specifications:
Data interface: usb3.0 FPGA: for Spartan 6 XC6SLX75 Transceiver: AD9361 dual channel rf transceiver IIP3 (at typical NF): -20dBm Power Output: > 10dBm Receive Noise Figure: < 8dB ADC Sample Rate (Max.): 61.44MS/s ADC Resolution: 12 bits DAC Sample Rate (Max.): 61.44MS/s DAC Resolution: 12 bits Host Sample Rate (16b): 61.44MS/s Frequency Accuracy(without reference clock): ±2.0ppm Frequency Accuracy(with reference clock): ±1PPB (0.001PPM) Size: 150 x 100mm/5.9 x 3.9" Frequency range: 70-6000Mhz TX port count: 2 RX port count: 2
Package Included:
1 x SDR Radio 1 x USB Cable 1 x Pin Cable
More Information: You can run B200 advance as original USRP B200 or run B200 advance to support 2RX or 2TX using our fpga firmware. But it can not support 2tx2rx at the same time.
To use our fpga firmware you need to modify B200 advance to B210. using below command to modify B200 to B210:
sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="product=2"
After this you need to unplug b200 advance and replug it. If you don't know where usrp_burn_mb_eeprom is you can find it:
cd / sudo find -name usrp_burn_mb_eeprom
Then copy our fpga firmware to original B210 fpga firmware path. But you may need to save original B210 fpga firmware first.
sudo cp /usr/share/uhd/images/usrp_b210_fpga.bin /usr/share/uhd/images/usrp_b210_fpga_back.bin sudo cp ./b200_fpga_2tx.bin /usr/share/uhd/images/usrp_b210_fpga.bin
The original fpga firmware path is depend on uhd version. You can find it using find command. To modify B210 to B200 you can run this command:
sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="product=1"